Type AC RCD 2-pole, 25 amp, 300 milliamps (2Px25Ax300mA) of 2 modules. Suitable for domestic, commercial and industrial.

Specifications:

• 6 kA short-circuit resistance (breaking capacity).
• Built according to IEC 61008-1 standard.
• Connection capacity 25 mm.
• 2.0 Nm tightening torque.
• Quick installation on 35mm DIN rail (IEC 60715).
• Local status signaling.
• Protection against earth leakage, current leakage and isolation function.
• High resistance to short circuits.
• AC and type A sensitivity.
• Nominal insulation voltage Ui 440V.
• Nominal impulse withstand voltage Uiamp 4kV.
• Allows the use of pin and fork type connection combs.
• Resistance of electromechanical components 4000 cycles of operation.
• Compatible with standard busbars.
• Test button "Test".

With a modern design ergonomic handle for easy maneuvering and a uniform aesthetic, the modular range WERDEN is an economical solution while professional for any installation that required the highest levels of demands.

Reference. WERDEN WE-9302

Type AC RCD 2-pole, 40 amp, 300 milliamps (2Px40Ax300mA) of 2 modules. Suitable for domestic, commercial and industrial.

Specifications:

• ​6 kA short-circuit resistance (breaking capacity).
• Built according to IEC 61008-1 standard.
• Connection capacity 25 mm.
• 2.0 Nm tightening torque.
• Quick installation on 35mm DIN rail (IEC 60715).
• Local status signaling.
• Protection against earth leakage, current leakage and isolation function.
• High resistance to short circuits.
• AC and type A sensitivity.
• Nominal insulation voltage Ui 440V.
• Nominal impulse withstand voltage Uiamp 4kV.
• Allows the use of pin and fork type connection combs.
• Resistance of electromechanical components 4000 cycles of operation.
• Compatible with standard busbars.
• Test button "Test".

With a modern design ergonomic handle for easy maneuvering and a uniform aesthetic, the modular range WERDEN is an economical solution while professional for any installation that required the highest levels of demands.

Reference. WERDEN WE-9307

Type AC RCD 2-pole, 63 amp, 300 milliamps (2Px63Ax300mA) of 2 modules. Suitable for domestic, commercial and industrial.

Specifications:

• 6 kA short-circuit resistance (breaking capacity).
• Built according to IEC 61008-1 standard.
• Connection capacity 25 mm.
• 2.0 Nm tightening torque.
• Quick installation on 35mm DIN rail (IEC 60715).
• Local status signaling.
• Protection against earth leakage, current leakage and isolation function.
• High resistance to short circuits.
• AC and type A sensitivity.
• Nominal insulation voltage Ui 440V.
• Nominal impulse withstand voltage Uiamp 4kV.
• Allows the use of pin and fork type connection combs.
• Resistance of electromechanical components 4000 cycles of operation.
• Compatible with standard busbars.
• Test button "Test".

With a modern design ergonomic handle for easy maneuvering and a uniform aesthetic, the modular range WERDEN is an economical solution while professional for any installation that required the highest levels of demands.

Reference. WERDEN WE-9312

Type AC RCD 2-pole, 80 amp, 300 milliamps (2Px80Ax300mA) of 2 modules. Suitable for domestic, commercial and industrial.

Specifications:

• 6 kA short-circuit resistance (breaking capacity).
• Built according to IEC 61008-1 standard.
• Connection capacity 25 mm.
• 2.0 Nm tightening torque.
• Quick installation on 35mm DIN rail (IEC 60715).
• Local status signaling.
• Protection against earth leakage, current leakage and isolation function.
• High resistance to short circuits.
• AC and type A sensitivity.
• Nominal insulation voltage Ui 440V.
• Nominal impulse withstand voltage Uiamp 4kV.
• Allows the use of pin and fork type connection combs.
• Resistance of electromechanical components 4000 cycles of operation.
• Compatible with standard busbars.
• Test button "Test".

With a modern design ergonomic handle for easy maneuvering and a uniform aesthetic, the modular range WERDEN is an economical solution while professional for any installation that required the highest levels of demands.

Reference. WERDEN WE-9313

Type AC RCD 2-pole, 100 amp, 300 milliamps (2Px100Ax300mA) of 2 modules. Suitable for domestic, commercial and industrial.

Specifications:

• 6 kA short-circuit resistance (breaking capacity).
• Built according to IEC 61008-1 standard.
• Connection capacity 25 mm.
• 2.0 Nm tightening torque.
• Quick installation on 35mm DIN rail (IEC 60715).
• Local status signaling.
• Protection against earth leakage, current leakage and isolation function.
• High resistance to short circuits.
• AC and type A sensitivity.
• Nominal insulation voltage Ui 440V.
• Nominal impulse withstand voltage Uiamp 4kV.
• Allows the use of pin and fork type connection combs.
• Resistance of electromechanical components 4000 cycles of operation.
• Compatible with standard busbars.
• Test button "Test".

With a modern design ergonomic handle for easy maneuvering and a uniform aesthetic, the modular range WERDEN is an economical solution while professional for any installation that required the highest levels of demands.

Reference. WERDEN WE-9314

SCHNEIDER AC type 2-pole, 25 amp, 30 milliampere (2Px25Ax30mA) 2-module differential switch.

Suitable for the domestic, tertiary and industrial sectors.

Specifications:

• BBuilt according to UNE-EN 61008-1:96
• Short circuit resistance of 6 kA
• Rated operating voltage in alternating 230 V
• Cable cross-section at 35 mm²

The Acti 9 range corresponds to Schneider Electric's fifth generation of low-voltage modular systems, setting a new precedent in the field of low voltage terminal distribution.

Acti 9 includes numerous innovations and is based on more than 40 years of Schneider Electric experience. A range of protections covering all applications, especially disturbed networks and contaminated environments, with total security and continuous service improvement.

Acti 9 is easy to select and install, and respects the environment. Its components are 100% recyclable and recoverable.

Reference. SCHNEIDER A9R60225

SCHNEIDER AC type 2-pole, 40 amp, 30 milliampere (2Px40Ax30mA) 2-module differential switch.

Suitable for the domestic, tertiary and industrial sectors.

Specifications:

• BBuilt according to UNE-EN 61008-1:96
• Short circuit resistance of 6 kA
• Rated operating voltage in alternating 230 V
• Cable cross-section at 35 mm²

The Acti 9 range corresponds to Schneider Electric's fifth generation of low-voltage modular systems, setting a new precedent in the field of low voltage terminal distribution.

Acti 9 includes numerous innovations and is based on more than 40 years of Schneider Electric experience. A range of protections covering all applications, especially disturbed networks and contaminated environments, with total security and continuous service improvement.

Acti 9 is easy to select and install, and respects the environment. Its components are 100% recyclable and recoverable.

Reference. SCHNEIDER A9R60240

SCHNEIDER AC type 2-pole, 63 amp, 30 milliampere (2Px63Ax30mA) 2-module differential switch.

Suitable for the domestic, tertiary and industrial sectors.

Specifications:

• BBuilt according to UNE-EN 61008-1:96
• Short circuit resistance of 6 kA
• Rated operating voltage in alternating 230 V
• Cable cross-section at 35 mm²

The Acti 9 range corresponds to Schneider Electric's fifth generation of low-voltage modular systems, setting a new precedent in the field of low voltage terminal distribution.

Acti 9 includes numerous innovations and is based on more than 40 years of Schneider Electric experience. A range of protections covering all applications, especially disturbed networks and contaminated environments, with total security and continuous service improvement.

Acti 9 is easy to select and install, and respects the environment. Its components are 100% recyclable and recoverable.

Reference. SCHNEIDER A9R81263

SCHNEIDER AC type 2-pole, 25 amp, 300 milliampere (2Px25Ax300mA) 2-module differential switch.

Suitable for the domestic, tertiary and industrial sectors.

Specifications:

• BBuilt according to UNE-EN 61008-1:96
• Short circuit resistance of 10 kA
• Rated operating voltage in alternating 230 V
• Cable cross-section at 35 mm²

The Acti 9 range corresponds to Schneider Electric's fifth generation of low-voltage modular systems, setting a new precedent in the field of low voltage terminal distribution.

Acti 9 includes numerous innovations and is based on more than 40 years of Schneider Electric experience. A range of protections covering all applications, especially disturbed networks and contaminated environments, with total security and continuous service improvement.

Acti 9 is easy to select and install, and respects the environment. Its components are 100% recyclable and recoverable.

Reference. SCHNEIDER A9R84225

SCHNEIDER AC type 2-pole, 40 amp, 300 milliampere (2Px40Ax300mA) 2-module differential switch.

Suitable for the domestic, tertiary and industrial sectors.

Specifications:

• BBuilt according to UNE-EN 61008-1:96
• Short circuit resistance of 10 kA
• Rated operating voltage in alternating 230 V
• Cable cross-section at 35 mm²

The Acti 9 range corresponds to Schneider Electric's fifth generation of low-voltage modular systems, setting a new precedent in the field of low voltage terminal distribution.

Acti 9 includes numerous innovations and is based on more than 40 years of Schneider Electric experience. A range of protections covering all applications, especially disturbed networks and contaminated environments, with total security and continuous service improvement.

Acti 9 is easy to select and install, and respects the environment. Its components are 100% recyclable and recoverable.

Reference. SCHNEIDER A9R84240