HAGER SP225N - Transient Surge permanante + 2P 25A

Set of combined protection against transient and permanent surges associated to 2P automatic general switch, cutting power 6000A according to UNE EN 60898-1 Curve C, rated current 25A.

Set of combined protection against transient and permanent surges associated to 2P automatic general switch, cutting power 6000A according to UNE EN 60898-1 Curve C, rated current 25A.

With the HAGER SP225N, the installation is protected against transient voltage peaks and against permanent voltage surges. Typically, the former are associated with the lightning phenomenon and the latter with the bad connection / breakdown of the three-phase installation neutral.

Technical specifications of the HAGER SP225N

• According to the standards: UNE EN 50550, UNE EN 61643-11, UNE EN 60898-1
• Number of half modules of 17,5mm only for instrument and kit: 10
• Number of poles: 2 P
• Number of modules: 4
• Rated rated current: 25 A
• Rated current at 20º C: 27 A
• Rated current at 30 ° C: 25 A
• Rated current at 35 ° C: 24 A
• Rated current at 40 ° C: 23 A
• Rated insulation voltage: 500 V
• Rated current at 45 ° C: 22 A
• Rated current at 50 ° C: 21 A
• Rated current at 55 ° C: 20 A
• Rated current at 60 ° C: 19 A
• Rated current at 70 ° C: 17 A
• Curve: C
• Power cut-off according to NF EN60898: 6 kA
• Ten. Asig. Of resistance to shocks: 4000 V
• Rated Frequency: 50/60 Hz
• Connection Type: Cage with screw
• Connection section in flexible cable: 6 mm²
• Tightening torque: 1, 2 Nm
• Connection in rigid cable: 10 mm²
• Connection Sec. Born Sup And inf. Rigid cable: 1/25 mm²
• Connection Sec. Sup. Flexible cable: 1/16 mm²
• Installed product height: 86.5 mm
• Width of installed product: 87.5 mm
• Depth of installed appliance: 70 mm
• Coef. Correcc. Corr. Nom. 2 apar.yuxtap .: 1
• Coef. Correcc. Corr. Nom. 3 apar.yuxtap .: 0.95
• Coef. Correcc. Corr. Nom. 4 and 5 ap.yux ..: 0.9
• Coef. Correcc. Corr. Nom. 6 pair.:x .: 0.85
• Coef. Of correction. Magnetic trip 200Hz: 1.2
• Coef. Of correction. 400Hz magnetic trip: 1.5
• Coef. Of correction. Magnetic trip 60Hz: 1
• Coef.correc. 100Hz magnetic trip: 1,1
• Degree of pollution / IEC60664 / IEC60947-2: 3
• Electrical endurance in number of cycles: 10000
• Mechanical endurance in number of maneuvers: 10000
• Threshold value min / max relay magn. In c.a .: 5/10 In
• Threshold value min / max thermal relay in c.c: 1,13 / 1,45 In
• Min. Threshold value Thermal relay in a .: 1,13 / 1,45 In
• Threshold value min / max function. Thermal dc: 5/15 In
• Power cut 1 Pol. IT400V (NF EN60947-2): 3 kA
• Power cut last AC. 230V (NF 60947-2): 1 kA
• Rated cutting power: 6 kA
• Rated cutting power: 6 kA
• Total power dissipated in IN: 7.1 W
• Storage temperature: -25 to 80 ° C
• Operating temperature: -25 to 60 ° C

​Reference. HAGER SP225N

The discount applied to the PVP is -57%