KNX-USB interfaceProduct no.: 481210KNX-USB interface enabled to address, set parameters, view and diagnose bus devices. The discount applied to the PVP is -60%
PVP.
682.50 €
You save 409.50 €
|
KNX line coupler / repeaterProduct no.: 481212KNX line coupler / repeater for installation on DIN rail. The discount applied to the PVP is -60%
PVP.
1,092.50 €
You save 655.50 €
|
Binary input 4 channelsProduct no.: 481214Binary input with a four-channel input signal, as well as a similar output signal. The discount applied to the PVP is -60%
PVP.
225.00 €
You save 135.00 €
|
Binary input 8 channelsProduct no.: 481215Binary input with dry contact and 2 operating modes: sensor controller and logic controller. The discount applied to the PVP is -60%
PVP.
363.75 €
You save 218.25 €
|
Binary input 24 channelsProduct no.: 481216Binary input, sensor with input signal that supports up to 24 dry contact inputs. The discount applied to the PVP is -60%
PVP.
619.75 €
You save 371.85 €
|
Binary switching actuator 4 channels 10AProduct no.: 4812254-channel 10A binary switching actuator for installation on a DIN rail. The discount applied to the PVP is -60%
PVP.
442.37 €
You save 265.42 €
|
Binary switching actuator 8 channels 10AProduct no.: 4812268-channel 10A binary switching actuator for installation on a DIN rail. The discount applied to the PVP is -60%
PVP.
699.75 €
You save 419.85 €
|
Binary switch actuator 12 channels 10AProduct no.: 48122712-channel 10A binary switching actuator for installation on a DIN rail. The discount applied to the PVP is -60%
PVP.
767.50 €
You save 460.50 €
|
Binary switching actuator 4 channels 16AProduct no.: 4812284-channel 16A binary switching actuator for installation on a DIN rail. The discount applied to the PVP is -60%
PVP.
505.00 €
You save 303.00 €
|
Binary switching actuator 8 channels 16AProduct no.: 4812298-channel 16A binary switching actuator for installation on a DIN rail. The discount applied to the PVP is -60%
PVP.
849.75 €
You save 509.85 €
|
Prices include VAT
1 - 10 of 31 results |
|
This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.