KNX-USB interface enabled to address, set parameters, view and diagnose bus devices.

• This device is a new KNX bus interface that has a galvanized and insulated USB connector, which establishes a bidirectional data connection between the computer and the KNX bus.
• The device is enabled to address, set parameters, display and diagnose the bus devices.
• The USB connector and the bus connection are located on the front of the device, next to the yellow LEDs.
• Each of them is an indicator that shows the status and data traffic between the bus and the computer.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Bus voltage: 21~30 V DC
• Bus interface: KNX/EIB
• Bus current: <10mA
• KNX terminals: Wire core diameter: (Red/grey) 0.6-0.8 mm
• USB connector: USB connector
• Operating temperature: -5ºC ~ 45ºC
• Storage temperature: -20ºC ~ 60ºC
• Operating Relative Humidity: Up to 90%
• Storage Relative Humidity: Up to 93%
• Certificates: CE, RoHS, KNX
• Size / Net Weight: 90 x 36 x 70mm / 70g
• Housing material: PA66
• Installation: Standard 35mm DIN rail
• Protection index: IP20

The discount applied to the PVP is -60%