KNX line coupler / repeater for installation on DIN rail.

• This device can be used both as a coupler and as a repeater (to amplify the signal).
• If it is used as a line coupler, it can be connected to another line or to the main line.
• A separate power supply is required for each of the new line segments and each must be electrically isolated.
• The line coupler can filter the telegrams and allows their passage or blocking to other adjacent lines.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Bus voltage: 21~30 V DC
• Bus interface: KNX/EIB
• Bus current: <30mA
• KNX cable: Core diameter: 0.75 - 0.85 mm
• KNX terminals: Core diameter: 0.75 - 0.85 mm
• Operating temperature: -5ºC ~ 45ºC
• Operating Relative Humidity: 10% ~ 98%
• Storage temperature: -20ºC ~ 60ºC
• Storage relative humidity: 5% ~ 93%
• Certificates: CE, RoHS, KNX
• Installation: Standard 35mm DIN rail
• Size: 90 x 36 x 70mm
• Protection index: IP20

The discount applied to the PVP is -60%