Level relay for Well or Tank control and DIN rail installation.

Level relays are electronic devices designed for tank level control. This function is carried out by reading the maximum level probes and acting on their output relay.

Specifications:

• DIN rail installation
• Protection grade: IP20
• Voltage: AC 220-240V/380-420V
• Auxiliary contact current: 10A
• Contactor: AC 220V 3A
• Power consumption: ≤ 2VA
• Weight: 150g
• Operating temperature: -10~40ºC
• Humidity: 35-85% RH

The discount applied to the PVP is -60%

Level relay for Well and Tank control and DIN rail installation.

Level relays are electronic devices designed for tank level control. This function is carried out by reading the maximum level probes and acting on their output relay.

Specifications:

• DIN rail installation
• Protection grade: IP20
• Voltage: AC 220-240V/380-420V
• Auxiliary contact current: 10A
• Contactor: AC 220V 3A
• Power consumption: ≤ 2VA
• Weight: 150g
• Operating temperature: -10~40ºC
• Humidity: 35-85% RH

The discount applied to the PVP is -60%

Level probe with high density polyethylene sheath and stainless steel metal electrode.

Maximum operating temperature: 100 ° C.

The discount applied to the PVP is -60%

Three-phase AC 230 relay for well or tank control.

Level relays are electronic devices designed for tank level control. This function is performed by reading the maximum level probes and acting on its output relay.

Specifications:

• Cycle: 6 - 60 m
• Output relay: SPDT, 10A, 220V AC
• Temperature Range: -10° C to + 70° C
• Base: MT740
• Degree of protection: IP40
• Measures: 80x75x35 mm

The discount applied to the PVP is -60%

Three-phase AC 230V relay for well and tank control.

Level relays are electronic devices designed for tank level control. This function is performed by reading the maximum level probes and acting on its output relay.

Specifications:

• Cycle: 6 - 60 m
• Output relay: SPDT, 10A, 220V AC
• Temperature Range: -10° C to + 70° C
• Base: MT740
• Degree of protection: IP40
• Measures: 80x75x35 mm

The discount applied to the PVP is -60%

Base for 11-pole Level Relay.

Level relays are electronic devices designed for tank level control. This function is performed by reading the maximum level probes and acting on its output relay.

Specifications:

• Number of Poles: 11
• Nominal Load Current / Voltage (A / VAC): 10/300
• Dielectric Strength Bonina / Contactor (V / S): 2000
• Dielectric strength between contactors (V / S): 2000
• External Connection Cable (AWG / mm2): 20-16 / 0.5-1.5
• Torque screw (Nm): 0.8

The discount applied to the PVP is -60%

Float switch with IP-68 degree of tightness, specially designed for clean water.

This float switch, made in a clearly visible red color, has 2 meters of cable and counterweight, its main function being to start and stop the pump automatically depending on the water level of the water tower, tank The pool.

Specifications:

• Sealing grade: IP-68
• Voltage: AC220/250V
• Maximum current: 16(8)A
• Frequency: 50-60Hz
• Maximum temperature: 55º C
• For water: Clean
• Contacts: 1NO - 1NC (1 normally open, 1 normally closed)
• Counterweight: Yes
• Color: Blue and Yellow (Clearly visible)
• Cable length: Includes 2 meters of cable

Installation:

• Set the counterweight on the power cable to control the level.
• Connect the electric cable to the electric pump and then fix it inside the water tank.
• The length of the cable between the point of attachment of the article and the body of the article determines the water level.
• The power cord terminal should never be inserted into water during installation.

Instructions for use for the filling operation.

Connect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water (the brown wire must be waterproof). The electric pump begins to fill with water and when the water in the tank reaches a level stops working.

Instructions for use for the emptying operation.

For the draining operation connect the brown cable to the water pump and the black cable to a neutral cable, as shown in the picture (the blue cable must be insulated). The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water.

Instructions for use for automatic filling and automatic emptying.

The picture shows the connection scheme of auto-switch filling and emptying of water, which is an extension of the two basic functions.

Instructions for use for the installation of the counterweight.

Take off (peel) the plastic ring of the counterweight before installation and insert the cable through the ring, then insert the cable through the conical part into the counterweight and set it with a moderate pressure.

The discount applied to the PVP is -60%

This IP-68 buoy-type float switch is ideal for controlling the level of a tank, a reservoir or a wastewater or industrial wastewater pond. The switch comes with a 5 meter cable and a counterweight already built into the float body.

The device switches at an angle of about 45 degrees, using a mechanical switch. The maximum switching voltage rating is 250 V AC, but it can be used with a lower voltage (ie 110 V, 220 V, 240 V, etc.). The switch has a changeover contact, so it can be used for normally closed (NC) or normally open (NO) operation.

It has three conductive wires: common, NC and NO. By connecting the circuit to the common wire and one of the other two wires, you can choose between normally closed (NC) or normally open (NO) operation. In other words, you can decide whether the switch should make contact when the float is in the raised or hung situation.

Normally, a normally open (NO) float switch turns "on" when the float is below a preset level (gravity forces it down) and "off" when it rises to the preset level. A normally closed (NC) float switch works in reverse. It closes when on hang and turns on when above the preset level. Normally closed (NC) or normally open (NO) operation depends on the wiring. It can be used to switch a pump or an alarm and has an IP68 waterproof rating.

Please read the manual carefully before connecting the float switch.

Specifications:

• It can be used for normally closed or normally open operation.
• Includes a 5 meter cable.
• The mechanical switch is designed for voltages up to 250 V AC.
• Robust waterproof PP casing (IP68 certified).
• With a liquid-tight double chamber and a counterweight integrated into the body of the float switch.
• Maximum depth level: 20 m.
• Maximum intensity: 10(8) A / 250V.
• For water: dirty or residual.
• Counterweight: Yes (incorporated in the float)

The discount applied to the PVP is -60%

Submersible dirty water pump with a motor power of 0.36 kW / 0.48 CV and a maximum depth of 5 meters.

Specifications:

• Power: 360 W
• Cable length: 10 m
• Motor power: 0.36 kW / 0.48 CV
• Max flow: 7500 l / h
• Maximum height: 5 m
• Maximum depth: 5 m
• Cable: H05RN-F3G 0.75 mm2
• Maximum foreign particle size: 35mm
• Tube diameter: 25mm / 30mm / 40mm
• Certificates: ROHS / LVD / GS / CE / EMC
• Protection: IPX8

The discount applied to the PVP is -60%

Submersible dirty water pump with a motor power of 0.75 kW / 1 CV and a maximum depth of 7 meters.

Specifications:

• Power: 750W
• Cable length: 10 m
• Motor power: 0.75 kW / 1 CV
• Max flow: 12,500 l/h
• Maximum height: 8m
• Maximum depth: 7m
• Wire: H05RN-F3G 0.75mm2
• Maximum size of foreign particles: 35 mm
• Tube diameter: 25.4mm/31.75mm/38.1mm
• Certificates: ROHS/LVD/GS/CE/EMC
• Protection: IPX8

The discount applied to the PVP is -60%