Remote control switch with 2NO, 2NC contacts, AC 230V voltage, 12VA / 1.9W AC power and 16A / AC1 intensity.

Functioning:

• Maximum number of incandescent lamps: 230 V, maximum 75 lamps (measured with 0.68 mA / 230 V AC incandescent lamps).
• Voltage range: AC 230 V Yes (A1-S)
• Supply voltage tolerance: -15%; + 10%
• Pulse duration Min. 25 ms

Specifications:

• No. of contacts: 2NO, 2NC
• Voltage: AC 230V
• Power: AC 12 VA / 1.9 W
• Intensity: 16A / AC1
• Dimensions: 90 x 18 x 64 mm
• Degree of protection: IP40 for the front panel
• Degree of protection: IP20 for terminals
• Regulations: IEC / EN 61810-1 - IEC / EN 61010-1

The discount applied to the PVP is -60%

Remote control switch with 2NO, 2NC contacts, AC/DC 12-240V voltage, 12VA / 1.9W AC power and 16A / AC1 intensity.

Functioning:

• Maximum number of incandescent lamps: 230 V, maximum 75 lamps (measured with 0.68 mA / 230 V AC incandescent lamps).
• Voltage range: AC 230 V Yes (A1-S)
• Supply voltage tolerance: -15%; + 10%
• Pulse duration Min. 25 ms

Specifications:

• No. of contacts: 2NO, 2NC
• Voltage: AC/DC 12-240V
• Power: AC 12 VA / 1.9 W
• Intensity: 16A / AC1
• Dimensions: 90 x 18 x 64 mm
• Degree of protection: IP40 for the front panel
• Degree of protection: IP20 for terminals
• Regulations: IEC / EN 61810-1 - IEC / EN 61010-1

The discount applied to the PVP is -60%

3-pole three-phase network voltage control relay + neutral.

Applications:

• Control for connection of moving equipment (construction equipment, agricultural equipment, refrigerated trucks).
• Control for the protection of people and equipment against the consequences of reversing.
• Normal/emergency power switching.
• Protection against the risk of motor load (phase failure).

Features of functions:

• It controls its own supply voltage (real RMS measurement).
• Set the 8-level rated operating voltage across the wheel.
• Measurement frequency range: 45Hz 65Hz.
• Voltage measurement accuracy <1%.
• The relay status is indicated by LEDs.
• 1 MODULE, DIN rail mounting.

Technical characteristics:

• Standard: IEC/EN 60255-6,IEC/EN61010-1
• Function: 3-phase monitoring
• Monitored terminals: L1+L2+L3-N
• Supply terminals: L1+N
• Voltage range: 127-132-138-220-230-240-254-265 (P-N)
• Working frequency range: 45Hz-65Hz
• Measuring range: 101V-318V
• Voltage adjustment threshold: 2%-20%
• Asymmetry adjustment threshold: 5%-15%
• Data: Hysteresis (Tolerance) 2%
• Phase value failure: 70% of the selected Min=165V
• Delay Time: Adjustable 0.1s-10s, 10%
• Measurement error: 1%≤
• Delay on connection: 0.5 s delay
• Actuation accuracy: 1% of the scale value
• Supply indication: Green led
• Output indication: Red led
• Reset time: 1000ms
• Output: 1×Output connection
• Output current: 10A/AC1
• Output voltage: 250VAC/24VDC
• Minimum DC cutting capacity: 500mW
• Temperature Coefficient: 0.05%/ºC,at=20℃
• Number of mechanical maneuvers: 1×10 7
• Number of electrical operations: 1×10 6
• Working temperature: -20ºC to +55ºC
• Storage temperature: -35ºC to +75ºC
• Mounting type: DIN rail EN/IEC 60715
• IP degree of protection: IP40 for front panel/IP20 terminals
• Overvoltage Type: III
• Pollution degree: 2
• Maximum terminal capacity (mm2): Rigid cable max.1×2.5 or 2×1.5/width max.1×2.5(AWG 12)
• Dimensions: 90×18×64mm
• Weight: 64g

The discount applied to the PVP is -60%

3-pole three-phase network voltage control relay WITHOUT NEUTRAL.

Applications:

• Control for connection of moving equipment (construction equipment, agricultural equipment, refrigerated trucks).
• Control for the protection of people and equipment against the consequences of reversing.
• Normal/emergency power switching.
• Protection against the risk of motor load (phase failure).

Features of functions:

• It controls its own supply voltage (real RMS measurement).
• Set the 8-level rated operating voltage across the wheel.
• Measurement frequency range: 45Hz 65Hz.
• Voltage measurement accuracy <1%.
• The relay status is indicated by LEDs.
• 1 MODULE, DIN rail mounting.

Technical characteristics:

• Standard: IEC/EN 60255-6,IEC/EN61010-1
• Function: 3-phase monitoring
• Monitored terminals: L1+L2+L3
• Supply terminals: L1+L2
• Voltage range: 220-230-240-380-400-415-440-460 (P-P)
• Working frequency range: 45Hz-65Hz
• Measuring range: 176V-552V
• Voltage adjustment threshold: 2%-20%
• Asymmetry adjustment threshold: 5%-15%
• Data: Hysteresis (Tolerance) 2%
• Phase value failure: 70% of the selected Min=165V
• Delay Time: Adjustable 0.1s-10s, 10%
• Measurement error: 1%≤
• Delay on connection: 0.5 s delay
• Actuation accuracy: 1% of the scale value
• Supply indication: Green led
• Output indication: Red led
• Reset time: 1000ms
• Output: 1×Output connection
• Output current: 10A/AC1
• Output voltage: 250VAC/24VDC
• Minimum DC cutting capacity: 500mW
• Temperature Coefficient: 0.05%/ºC,at=20℃
• Number of mechanical maneuvers: 1×10 7
• Number of electrical operations: 1×10 6
• Working temperature: -20ºC to +55ºC
• Storage temperature: -35ºC to +75ºC
• Mounting type: DIN rail EN/IEC 60715
• IP degree of protection: IP40 for front panel/IP20 terminals
• Overvoltage Type: III
• Pollution degree: 2
• Maximum terminal capacity (mm2): Rigid cable max.1×2.5 or 2×1.5/width max.1×2.5(AWG 12)
• Dimensions: 90×18×64mm
• Weight: 64g

The discount applied to the PVP is -60%

2-pole DC circuit breaker, 15 amps (2Px15A) with 2 modules. Specially designed for Photovoltaic.

Specs:

• C-curve: 12In±20%
• Built according to the IEC/EN 60947-3 standard.
• Poles: 2P
• Rated voltage (Ue): 500V
• Insulation voltage (Ui): 1000V
• Rated current: 15A
• Breaking capacity: 6kV
• Mechanical Duration: 10000

The WERDEN protection and control range is an economic and professional solution for any type of installation in which the highest levels of demands are required.

Reference. WERDEN WE-9470

The discount applied to the PVP is -70%

2-pole DC circuit breaker, 20 amps (2Px20A) with 2 modules. Specially designed for Photovoltaic.

Specs:

• C-curve: 12In±20%
• Built according to the IEC/EN 60947-3 standard.
• Poles: 2P
• Rated voltage (Ue): 500V
• Insulation voltage (Ui): 1000V
• Rated current: 20A
• Breaking capacity: 6kV
• Mechanical Duration: 10000

The WERDEN protection and control range is an economic and professional solution for any type of installation in which the highest levels of demands are required.

Reference. WERDEN WE-9472

The discount applied to the PVP is -70%

2-pole DC circuit breaker, 25 amps (2Px25A) with 2 modules. Specially designed for Photovoltaic.

Specs:

• C-curve: 12In±20%
• Built according to the IEC/EN 60947-3 standard.
• Poles: 2P
• Rated voltage (Ue): 500V
• Insulation voltage (Ui): 1000V
• Rated current: 25A
• Breaking capacity: 6kV
• Mechanical Duration: 10000

The WERDEN protection and control range is an economic and professional solution for any type of installation in which the highest levels of demands are required.

Reference. WERDEN WE-9474

The discount applied to the PVP is -70%

2-pole DC circuit breaker, 32 amps (2Px32A) with 2 modules. Specially designed for Photovoltaic.

Specs:

• C-curve: 12In±20%
• Built according to the IEC/EN 60947-3 standard.
• Poles: 2P
• Rated voltage (Ue): 500V
• Insulation voltage (Ui): 1000V
• Rated current: 32A
• Breaking capacity: 6kV
• Mechanical Duration: 10000

The WERDEN protection and control range is an economic and professional solution for any type of installation in which the highest levels of demands are required.

Reference. WERDEN WE-9476

The discount applied to the PVP is -70%

Multifunction timer with 1 normally open contact 1 NO (8A).

Specifications:

• Voltage: 400V
• Number of poles: 3 Poles
• Contacts: 1 NO (8A) normally open
• Time range: 0.2 s - 10 s
• Adjustable overvoltage: Uvo = 1.05 - 1.25 A
• Adjustable Undervoltage: Uve = 0.75 - 0.95 A
• Phase-to-phase and sequence control

The discount applied to the PVP is -60%

Level relay for DIN rail and well or tank control with 2 or 1 level control function.

Specifications:

• Function: 2 or 1 levels of control
• Connection terminals: A1-A2
• Voltage range: AC / DC 24-240V (50-60Hz)
• Input: max 2VA
• Voltage tolerance: -15%; + 10%
• Sensitivity (resistance input): adjustable between 5 kΩ -100 kΩ
• Electrode voltage: Max. AC 5V
• Probe current: AC <0.1 mA
• Response time: Max. 400 ms
• Maximum cable length: 800 m (25kΩ sensitivity), 200 m (100 kΩ sensitivity)
• Maximum probe cable length: 400 nF (25kΩ sensitivity), 100 nF (100 kΩ sensitivity)
• Delay time: adjustable, 0.5 -10 s
• Delay time after power on: 1.5 s
• Setting accuracy: + - 5%
• Temperature coefficient: 0.05% / 0C, at = 200C (0.05% 0F, at = 680F)
• Output: 1 × SPDT
• Output current: 10A / AC1
• Connection voltage: 250VAC / 24VDC
• Minimum DC breaking capacity: 500mW
• Output indication: Red Led
• Mechanical Life: 1 × 107
• Electrical Life: 1 × 106
• Reset time: Max. 200 ms
• Working temperature: 20 ºC ~ +55 ºC
• Storage temperature: -35 ºC ~ +75 ºC
• DIN rail mounting: Din rail EN / IEC 60715
• Degree of protection: IP40 for front panel / IP20 terminals
• Overvoltage category: III
• Pollution degree: 2
• Maximum cable size: Rigid cable: Max. 1 x 2.5 mm or 2 x 1.5 mm. Coated: Max. 1 x 2.5 mm (AWG 12)
• Dimensions: 90 × 18 × 64mm
• Weight: 81g
• Standard IEC / EN 62055-1, IEC / EN61010-1

The discount applied to the PVP is -60%