5-60A single-phase energy meter for installation on a DIN rail and control electricity consumption from anywhere via WIFI.

An ideal meter to measure, with total precision, energy and electricity consumption in camping plots, marinas, parts of the house, rental houses, etc. It can also be applied to machinery and energy control of individual loads in industrial facilities.

Unlike other systems, this bulb does not need a hub to be controlled, that is, it does not require any additional device for its control. You will be able to interact and control it directly from your mobile with the free Smart Life app available for iOS and Android.

A product fully controllable by WIFI and compatible with Amazon Alexa, Google Home and IFTTT, ideal for creating a smart and efficient home.

With the Smart Life app you can control each and every one of your smart devices from your mobile, whenever and wherever you want. Depending on the product you want to control, Smart Life will allow you, among other things:

• Control the product from anywhere in the world.
• Schedule on and off.
• Regulate the intensity and tone of the bulbs.
• Configure different environments and scenes.
• Create families, different rooms and groups to control the home.

To be able to enjoy all these advantages, you only need to download the free Smart Life app available for iOS and Android.

Once you have created your Smart Life account, you can add products to be able to have full control of them. Smart Life also allows you to create a family and invite other members so they can access control of all the products you have added.

Technical data:

• Precision: 1
• Voltage: 110-230V
• Current: 5 (60) A
• Meter constant: 1200 imp/KWh
• Operating voltage: 0.9 Un ~ 1.1 Un
• Extreme operating voltage: 0.7 Un ~ 1.3 Un
• Working temperature: -45ºC ~ +70ºC
• Annual average humidity: ≤75%
• Frequency: 50/60Hz
• Power consumption: ≤1W, 6VA
• Measurements: 100 x 36 x 66 mm
• Weight: 0.8kg
• Storage: -25ºC ~ 70ºC at a relative humidity less than 85%.

Phase energy meter 30A for installation on DIN rail and control electricity consumption.

An ideal place to measure, with precision, energy and electricity consumption in plots campgrounds, marinas, parts of housing, rental housing counter etc. It can also be applied in machinery and energy control of individual loads in industrial installations.

This counter meets the technical requirements for single phase meters and has been built in compliance with IEC 61036.

Technical data:

• Number of modules: 1 module (DIN rail installation)
• Amperage: 5-30 A
• Nominal voltage (Un): 230V AC
• Voltage: 161-300V AC
• AC current withstand: 2KV per minute
• Current supported shock: 1'2 Waves 6KV-S
• Basic current (Ib): 5A
• maximum rated current (Imax): 32A
• Operating current range: 0.25A-32A
• Overvoltage supported: 960A for 0.01s
• Operating frequency range: 50Hz ± 10%
• Internal power consumption: <= 2W / 10VA
• Indic emission test (red LED): 2000 pulses per kWh (0'5Wh / imp)
• Pulse emission rate (Pins 20 and 21): 2000 pulses per kWh (0'5Wh / imp)
• Power supply indicator (green LED): The counter starts and runs well
• Consumption indicator (red LED): Flashes when the load is running out
• data display mode: 7 + 1 digits in the LCD
• Data storage: Data can be stored for more than twenty years when disconnected.

Phase energy meter 30A for installation on DIN rail and control electricity consumption.

An ideal place to measure, with precision, energy and electricity consumption in plots campgrounds, marinas, parts of housing, rental housing counter etc. It can also be applied in machinery and energy control of individual loads in industrial installations.

This counter meets the technical requirements for single phase meters and has been built in compliance with IEC 61036.

Technical data:

• RESET function
• Number of modules: 4 modules (DIN rail installation)
• Amperage: 5-30 A
• Nominal voltage (Un): 230V AC
• Voltage: 161-300V AC
• AC current withstand: 2KV per minute
• Current supported shock: 1'2 Waves 6KV-S
• Basic current (Ib): 5A
• maximum rated current (Imax): 32A
• Operating current range: 0.25A-32A
• Overvoltage supported: 960A for 0.01s
• Operating frequency range: 50Hz ± 10%
• Internal power consumption: <= 2W / 10VA
• Indic emission test (red LED): 2000 pulses per kWh (0'5Wh / imp)
• Pulse emission rate (Pins 20 and 21): 2000 pulses per kWh (0'5Wh / imp)
• Power supply indicator (green LED): The counter starts and runs well
• Consumption indicator (red LED): Flashes when the load is running out
• data display mode: 7 + 1 digits in the LCD
• Data storage: Data can be stored for more than twenty years when disconnected.

Three-phase energy meter for installation on a DIN rail and controlling the power consumption.

An ideal meter to measure, with total precision, the energy and the electricity consumption in camping plots, nautical ports, parts of the house, rental housing etc. It can also be applied in machinery and energy control of individual loads in industrial facilities.

This meter meets the technical requirements for single-phase meters and has been built in compliance with IEC 62053-21.

Technical data:

• Installation in 35 mm DIN rail, which complies with the EN 50022 standard.
• Class I
• Current: 5 (30) / 10 (60) / 5 (100) / 20 (100)
• Start current (A): 0.02 / 0.04 / 0.08
• Insulation performance: Alternating voltage 4kV for 1 min, 1.2 / 50us 6kV wave pulse voltage.
• Width of ten poles (12.5 mm), which complies with standard JB / T7121-1993.
• Wiring type S (type U).
• 7-digit LCD screen, 6 1 (999999.1 kWh).
• It has a closed polarity passive output port and a remote non-polarity passive output port that complies with IEC 62053-31 and DIN 43864.
• It has five led indicators for each power supply state, closed energy impulse signal and remote energy pulses and data communication status respectively.
• Automatic detection of the flow direction of the charging current and instructions on the LCD screen.

Anti-flicker capacitor for residual current 0.47 µF - 310 V and PIN terminal.

This anti-flicker capacitor solves the problem in installations where the luminaire remains slightly on, even with the switch mechanism off.

Specifications:

• ID: X2
• Capacity: 0.47µF
• Voltage: 310VAC
• Size: 18 x 8.4 x 14.5mm
• Plastic material
• Terminal: PIN
• Working temperature: -40ºC ~110ºC
• Protection class : S0

RE PLA LE1 by DINUY, is a light regulator specially designed to work with adjustable or dimmable LED lamps using push buttons and in tablet format to be installed with any push button model on the market, without the need to change the model of the housing mechanisms. or stay to regulate.

This regulator pickup is compatible with:

• 230V dimmable LED lamps at the beginning of the phase from 4W to 100W.
• 230V LED lamps dimmable at end of phase from 4W to 350W.
• Dimmable 12V LED lamps with electronic transformer (6 transformers x 50W and 1 lamp per transformer or 3 transformers x 100W and 1 lamp per transformer).

Other features:

• Control by means of conventional buttons: short presses turn on/off and long presses regulate. For illuminated pushbuttons or with pilot lights, the maximum number of pushbuttons is 3.
• Memory function: when switched on with the button, the luminaires return to the same level they had before they were switched off.
• Extra-flat format, only 12mm thick. Mounting in mechanism box, behind the push button.
• Possibility of adjusting the minimum dimming level of the lamps, avoiding unwanted flickering or turning off at low levels.
• Protected against overloads and short circuits. It incorporates thermal protection that reduces the intensity of the light in case of overheating.

RE PLA LE3 by DINUY, is a light regulator specially designed for its operation with dimmable or dimmable LED lamps by means of push buttons and in tablet format to be installed in a registration box, with any push button model on the market, without needing to change the model of housing mechanisms or stay to be regulated.

This regulator pickup is compatible with:

• 230V dimmable LED lamps at the beginning of the phase from 4W to 100W.
• 230V LED lamps dimmable at end of phase from 4W to 350W.
• Dimmable 12V LED lamps with electronic transformer (6 transformers x 50W and 1 lamp per transformer or 3 transformers x 100W and 1 lamp per transformer).

Other features:

• Control by means of conventional buttons: short presses turn on/off and long presses regulate. For illuminated pushbuttons or with pilot lights, the maximum number of pushbuttons is 3.
• Memory function: when switched on with the button, the luminaires return to the same level they had before they were switched off.
• Flat format. Installation in register box.
• Possibility of adjusting the minimum dimming level of the lamps, avoiding unwanted flickering or turning off at low levels.
• Protected against overloads and short circuits. It incorporates thermal protection that reduces the intensity of the light in case of overheating.

MULTI DIMMER 250, a light regulator specially designed for operation with any type of dimmable or dimmable LED using pushbuttons and in pill format to install with any pushbutton model on the market, without needing to change the model of mechanisms of the home or room to be regulated. It would also work with halogen or incandescent bulbs.

It has a regulation range from 1% to 100%, equivalent to the same percentage of energy savings. It has a memory of the last power-up even after power failure, and a low-maintenance power-on function by pressing with the light off. Minimum level setting that ensures maximum compatibility with any Dimmable LED lamp.

In pill format and easy to install in mechanism boxes or standardized register boxes, the installation diagram can be found on the front printing of the product.

CONTROL

By means of buttons of any brand on the market, Niessen, Simon, BJC, etc. It admits up to 5 with indicator light (neon or Led), and unlimited without indicator light.

FUNCTIONING

• Short press: progressively turn on or off with an elegant ramp.
• Sustained pulsation: Keeping it pressed produces the regulation, stopping when the button is released or when the maximum or minimum is reached.
• Minimum level adjustment: Turn on the lamp with a short press. Keep pressed until the minimum regulation level is reached. Once there, turn the adjustment next to the terminal in one direction or the other, until reaching an adequate and stable minimum level. This level will depend on the lamp that is being regulated and the number of lamps.

Among its features we have that it memorizes the last ignition and has a progressive on and off that prolongs the life of the lamps.

If several regulators are installed in the same register box, we must avoid that they touch each other, to avoid possible interference and overheating.

DATA SHEET

• Allowable load: Specially designed for any type of dimmable or dimmable LED
• Power supply: 230 V AC - 50 Hz. With voltage and frequency recognition
• LED power: 250W maximum dimmable LEDs for power factor f.d.p. = 1
• Protections: Overload, short circuit and overheating
• Savings: equivalent to the regulation percentage
• Certifications: CE, RoHS
• Standards: UNE-EN 55015 / A1 / A2, UNE-EN 61547 / A1, UNE-EN 60669-1 / A1 / Err and UNE-EN 60669-2-1
• Dimensions: 47x47x14 mm

MULTI TEMPO 500 is a Universal timer for all types of loads that admits pushbutton input from F or N indistinctly. This is activated (timed) when receiving power and is adjustable from 0.5 seconds to 10 minutes, in addition to being reset at any time during a time delay.

The MULTI TEMPO 500 is suitable for LEDs.

Ideal for stairs and, in general, to time any device. Valid for many industrial circuits thanks to its activation by only receiving power.

In pill format and easy to install in mechanism boxes or standardized register boxes, the installation diagram can be found on the front printing of the product.

CONTROL

By pushbuttons (up to 5 pushbuttons with pilot light and unlimited without pilot) or by switches. Supports switched and crossovers.

FUNCTIONING

By pressing the button or with each change in the state of a switch, the lamp turns on and the timing set in its setting begins. Likewise, each time it feeds, it makes a timing.

DATA SHEET

• Allowable load: Multi-load, admits any type of load
• Maximum power: From 0W to 500W
• Power supply: 230 V AC 50 Hz.
• Timing: 0.5 seconds to 10 minutes
• Protections: Overloads, short circuits and overheating
• Certifications: CE, RoHS
• Standards: UNE-EN 55015 / A1 / A2, UNE-EN 61547 / A1, UNE-EN 60669-1 / A1 / Err and UNE-EN 60669-2-1
• Dimensions: 47x47x14 mm

Remote control switch 0W to 500W multiload. Works with buttons, avoid switched and crosses. This step relay is especially suited for installations with regulators push all kinds of lamps, being the ideal solution for homes and commercial premises.

In pill and easy installation in conduit boxes or boxes of standardized registration, printing on the front of the product format is the installation diagram.

OPERATION

One touch connects and disconnects other.

TECHNICAL

• Load capacity: Full loads
• Food: 110-240 v ac 50 Hz With recognition of voltage and frequency
• Maximum permissible power: 500W maximum From
• Neon Switches: Up to 5 neons
• Switches with LED: Up to 5 LED
• Protections: Thermal fuse, erroneous liaison
• Dimensions: 47x47x14 mm