Ladder minute for installation on DIN rail 16A - 230 V. It allows to save energy and ensure the operation of the load. Adjustable timing from 30s to 10 min.

Its installation scheme coincides with that of most of the existing minute holders in the market.

Technical characteristics:

• Architecture: DIN Rail Mounting
• Functions: with forced ON / automatic selector
• Configuration: NA Contact
• Rated frequency 50/60 Hz
• Rated operating voltage in alternating 230 V
• Control circuit voltage in AC 230 V
• Operating voltage 230 V ~
• Assigned employment current in AC1 16 A
• 100 mA standby intensity
• Pot. max. in fluo do not compensate. per 3600 VA output
• Power consumption 1 VA
• Total power dissipated under conditions of nominal intensity 2 W
• Power dissipated by 0.25 W coil
• 230 V supply voltage
• Width of installed product 17.5 mm
• Width DIN rail mounting device (RMD) 1 modules
• Management of fluorescent lamps max. 3600 VA
• Max.power with parallel compensated fluorescent tubes 1000 VA
• Management of incandescent and halogen lamps 230 V max. 2300 W
• Maximum power with 2300 W incandescent lamps
• Installation, mounting DIN rail
• Conductor section (flexible) 1… 6 mm²
• Conductor section (rigid) 1.5… 10 mm²
• Rigid cable connection section 1.5 / 10 mm²
• Flexible cable connection section 1/6 mm²
• Connection type Screw cage terminal
• 3 and 4 wire connection
• Number of contacts 1
• Contact type 1 NO - For 3 and 4-circuits (automatic detection) - With threaded terminals
• 30 second timing range
• Delay time to disconnection, adjustable 30 seconds to 10 minutes
• IP20 IP protection index

Reference EMN001 HAGER

The discount applied to the PVP is -75%