Transient overvoltage protector limiter with 3 Poles + Neutral, 10 kA, Type 2. Manufactured by SCHNEIDER, reference A9L16618 Acti9 Quick PF range.

Technical characteristics of the SCHNEIDER A9L16618 Acti9 Quick PF

• Type of product: Transient overvoltage protector limiter - Overvoltage dissipator.
• Device short name: IQuick PF
• Device application: for current>0.1A
• Standards: EN 61643-11:2012 and IEC 61643-11:2011
• Product Certifications: CE
• Quality labels: NF
• Number of poles: 3P + N
• Type of surge suppressor: Electrical distribution network
• Grounding system: TN-S / TT
• Type and class of surge suppressor: Type 2
• Surge Limiter Technology: MOV + GDT
• Rated operational voltage [Ue]: 230/400 V AC - type of cable: +/- 10%) at 50/60 Hz
• Nominal discharge current [In]: Differential mode, state 1 5 kA - cable type: L/N), Common mode, state 1 20 kA - cable type: N/PE)
• Maximum discharge current [Imax]: Common mode, state 1 10 kA N/PE, Differential mode, state 1 20 kA L/N
• Maximum continuous operating voltage [Uc]: Common mode, state 1 275 V N/PE, Differential mode, state 1 275 V L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.5 kV type 2 L/N
• Temporary overvoltage [Ut]: 337 V L/N 5 s maintained, 1200 V N/PE 200 ms safe failure mode, 442 V L/PE 5 s maintained
• Current monitoring [If]: 0.1 kA common mode N/PE
• Short-circuit current rating [Isccr]: 6 kA
• Type of disconnecting device: Integrated circuit breaker - Icu 6 kA
• Mounting mode: Adjustable on clip - cable type: DIN rail)
• 9mm pitches: 4
• Dimensions: Height 106.7mm - Width 88.4mm - Depth 74.1mm

​Reference. SCHNEIDER A9L16618

The discount applied to the PVP is -59%

Combined protection set against transient and permanent overvoltages associated with a 25A 1-Pole + Neutral automatic general switch, breaking capacity 6000A according to UNE EN 60898-1 Curve C.

The Combi SPU Resi9 by Schneider Electric offer greater integrated protection in the main switch against overloads and short circuits, permanent and transient type 2 overvoltages, lightning strikes, network maneuvers Recommended for the protection of electrical and electronic equipment (computers, TV , modems, hi-fi equipment, etc). Both protections against permanent and transient overvoltages are mandatory for the installation of an electric vehicle recharging point or solar panels. In addition to requiring its installation in most autonomous communities.

Technical characteristics of the SCHNEIDER R9L20625 Resi9 Combi

• Product type: Automatic switch with combined protection against Temporary and Permanent overvoltages.
• Device application: for current>0.1A
• Number of poles: 1P + N
• Number of protected poles: 1
• Neutral Position: Left
• Rated current [In]: 25A
• Network type: AC
• Trigger Unit Technology: Thermal-Magnetic
• Curve code: C
• Breaking capacity: 6000 A Icn conforming to EN/IEC 60898-1
• Control Type: Lever
• Mount Type: Fixed
• Mounting bracket: DIN rail
• Quality labels: CE, AENOR
• Dimensions: Height 74mm - Width 54mm - Depth 93mm
• Mechanical durability: 20,000 cycles
• Electrical durability: 10000 cycles
• Mains frequency: 50 Hz
• Rated operational voltage [Ue]: 230 V AC 50 Hz
• Maximum continuous operating voltage [Uc]: Common mode, state 1 260 V AC N/PE, Differential mode, state 1 340 V AC L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.5 kV type 2 L/N
• Rated discharge current: 5 kA
• Maximum output current: 15 kA
• Trigger voltage threshold: 275 V
• local signals: Signaling for overvoltage discharge, status 1 LED (green/red), Signaling for voltage release, status 1 flag (white/red)
• Contact position indicator: Yes

​Reference. SCHNEIDER R9L20625

The discount applied to the PVP is -63%

Combined protection set against transient and permanent overvoltages associated with a 40A 1-Pole + Neutral automatic general switch, breaking capacity 6000A according to UNE EN 60898-1 Curve C.

The Combi SPU Resi9 by Schneider Electric offer greater integrated protection in the main switch against overloads and short circuits, permanent and transient type 2 overvoltages, lightning strikes, network maneuvers Recommended for the protection of electrical and electronic equipment (computers, TV , modems, hi-fi equipment, etc). Both protections against permanent and transient overvoltages are mandatory for the installation of an electric vehicle recharging point or solar panels. In addition to requiring its installation in most autonomous communities.

Technical characteristics of the SCHNEIDER R9L20640 Resi9 Combi

• Product type: Automatic switch with combined protection against Temporary and Permanent overvoltages.
• Device application: for current>0.1A
• Number of poles: 1P + N
• Number of protected poles: 1
• Neutral Position: Left
• Rated current [In]: 40A
• Network type: AC
• Trigger Unit Technology: Thermal-Magnetic
• Curve code: C
• Breaking capacity: 6000 A Icn conforming to EN/IEC 60898-1
• Control Type: Lever
• Mount Type: Fixed
• Mounting bracket: DIN rail
• Quality labels: CE, AENOR
• Dimensions: Height 74mm - Width 54mm - Depth 93mm
• Mechanical durability: 20,000 cycles
• Electrical durability: 10000 cycles
• Mains frequency: 50 Hz
• Rated operational voltage [Ue]: 230 V AC 50 Hz
• Maximum continuous operating voltage [Uc]: Common mode, state 1 260 V AC N/PE, Differential mode, state 1 340 V AC L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.5 kV type 2 L/N
• Rated discharge current: 5 kA
• Maximum output current: 15 kA
• Trigger voltage threshold: 275 V
• local signals: Signaling for overvoltage discharge, status 1 LED (green/red), Signaling for voltage release, status 1 flag (white/red)
• Contact position indicator: Yes

​Reference. SCHNEIDER R9L20640

The discount applied to the PVP is -62%

Combined protection set against transient and permanent overvoltages associated with a 25A 3-Poles + Neutral automatic general switch, breaking capacity 10 kA according to UNE EN 60898-1 Curve C.

The Combi SPU Resi9 by Schneider Electric offer greater integrated protection in the main switch against overloads and short circuits, permanent and transient type 2 overvoltages, lightning strikes, network maneuvers Recommended for the protection of electrical and electronic equipment (computers, TV , modems, hi-fi equipment, etc). Both protections against permanent and transient overvoltages are mandatory for the installation of an electric vehicle recharging point or solar panels. In addition to requiring its installation in most autonomous communities.

Technical characteristics of the SCHNEIDER A9L20725 Resi9 Combi

• Product type: Automatic switch with combined protection against Temporary and Permanent overvoltages.
• Device application: for current>0.1A
• Number of poles: 3P + N
• Number of protected poles: 3
• Neutral Position: Left
• Rated current [In]: 25A
• Network type: AC
• Trigger Unit Technology: Thermal-Magnetic
• Curve code: C
• Breaking capacity: 10 kA conforming to Icu
• Control Type: Lever
• Mount Type: Fixed
• Mounting bracket: DIN rail
• Quality labels: CE, AENOR
• Dimensions: Height 76mm - Width 161mm - Depth 102mm
• Mechanical durability: 20,000 cycles
• Electrical durability: 10000 cycles
• Mains frequency: 50 Hz
• Rated operational voltage [Ue]: 400 V AC 50 Hz
• Maximum continuous operating voltage [Uc]: Common mode, state 1 260 V AC N/PE, Differential mode, state 1 340 V AC L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.1 kV type 2 L/N
• Rated discharge current: 5 kA
• Maximum output current: 20 kA
• Trigger voltage threshold: 275 V
• local signals: Signaling for overvoltage discharge, status 1 LED (green/red), Signaling for voltage release, status 1 flag (white/red)
• Contact position indicator: Yes

​Reference. SCHNEIDER A9L20725

The discount applied to the PVP is -67%

Combined protection set against transient and permanent overvoltages associated with a 32A 3-Poles + Neutral automatic general switch, breaking capacity 10 kA according to UNE EN 60898-1 Curve C.

The Combi SPU Resi9 by Schneider Electric offer greater integrated protection in the main switch against overloads and short circuits, permanent and transient type 2 overvoltages, lightning strikes, network maneuvers Recommended for the protection of electrical and electronic equipment (computers, TV , modems, hi-fi equipment, etc). Both protections against permanent and transient overvoltages are mandatory for the installation of an electric vehicle recharging point or solar panels. In addition to requiring its installation in most autonomous communities.

Technical characteristics of the SCHNEIDER A9L20732 Resi9 Combi

• Product type: Automatic switch with combined protection against Temporary and Permanent overvoltages.
• Device application: for current>0.1A
• Number of poles: 3P + N
• Number of protected poles: 3
• Neutral Position: Left
• Rated current [In]: 32A
• Network type: AC
• Trigger Unit Technology: Thermal-Magnetic
• Curve code: C
• Breaking capacity: 10 kA conforming to Icu
• Control Type: Lever
• Mount Type: Fixed
• Mounting bracket: DIN rail
• Quality labels: CE, AENOR
• Dimensions: Height 76mm - Width 161mm - Depth 102mm
• Mechanical durability: 20,000 cycles
• Electrical durability: 10000 cycles
• Mains frequency: 50 Hz
• Rated operational voltage [Ue]: 400 V AC 50 Hz
• Maximum continuous operating voltage [Uc]: Common mode, state 1 260 V AC N/PE, Differential mode, state 1 340 V AC L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.1 kV type 2 L/N
• Rated discharge current: 5 kA
• Maximum output current: 20 kA
• Trigger voltage threshold: 275 V
• local signals: Signaling for overvoltage discharge, status 1 LED (green/red), Signaling for voltage release, status 1 flag (white/red)
• Contact position indicator: Yes

​Reference. SCHNEIDER A9L20732

The discount applied to the PVP is -59%

Combined protection set against transient and permanent overvoltages associated with a 40A 3-Poles + Neutral automatic general switch, breaking capacity 10 kA according to UNE EN 60898-1 Curve C.

The Combi SPU Resi9 by Schneider Electric offer greater integrated protection in the main switch against overloads and short circuits, permanent and transient type 2 overvoltages, lightning strikes, network maneuvers Recommended for the protection of electrical and electronic equipment (computers, TV , modems, hi-fi equipment, etc). Both protections against permanent and transient overvoltages are mandatory for the installation of an electric vehicle recharging point or solar panels. In addition to requiring its installation in most autonomous communities.

Technical characteristics of the SCHNEIDER A9L20740 Resi9 Combi

• Product type: Automatic switch with combined protection against Temporary and Permanent overvoltages.
• Device application: for current>0.1A
• Number of poles: 3P + N
• Number of protected poles: 3
• Neutral Position: Left
• Rated current [In]: 40A
• Network type: AC
• Trigger Unit Technology: Thermal-Magnetic
• Curve code: C
• Breaking capacity: 10 kA conforming to Icu
• Control Type: Lever
• Mount Type: Fixed
• Mounting bracket: DIN rail
• Quality labels: CE, AENOR
• Dimensions: Height 76mm - Width 161mm - Depth 102mm
• Mechanical durability: 20,000 cycles
• Electrical durability: 10000 cycles
• Mains frequency: 50 Hz
• Rated operational voltage [Ue]: 400 V AC 50 Hz
• Maximum continuous operating voltage [Uc]: Common mode, state 1 260 V AC N/PE, Differential mode, state 1 340 V AC L/N
• Voltage protection level [Up]: Common mode <1.5 kV type 2 N/PE, Differential mode <1.5 kV type 2 L/N
• Rated discharge current: 15 kA
• Maximum output current: 40 kA
• Trigger voltage threshold: 275 V
• local signals: Signaling for overvoltage discharge, status 1 LED (green/red), Signaling for voltage release, status 1 flag (white/red)
• Contact position indicator: Yes

​Reference. SCHNEIDER A9L20740

The discount applied to the PVP is -56%

Transient overvoltage limiter type T2, 1P+N, 20 kA, 320VA for the general protection of insensitive equipment in single-phase installations.

This limiter complies with all the regulations required for the protection of transient overvoltages in single-phase installations.

Surge suppressor with pluggable cartridges and status indicators, green, surge suppressor in operation and orange cartridges to replace.

Technical characteristics

• Type 2 (T2) Low Voltage Transient Surge Arresters
• Neutral regimes: TT, TNC, TNS.
• Number of poles: 1P+N
• Number of modules: 2.
• Complies with EN/IEC 61643-11 standards
• Number of conductors (without earth connection): 2
• Rated discharge current (8/20): 5 kA
• AC Rated Voltage: 230V
• AC maximum continuous voltage: 320 V
• L-N protection level: 1.2 kV
• Protection level N-PE: 1.5 kV
• Built-in Backup Fuse: No
• Mounting method: Top hat profile rail 35 mm
• Maximum rigid conductor cross section (single/multi-conductor): 35 mm²
• flexible conductor cross section (finely stranded): 25 mm²
• With telecommunication contact: No
• Signaling on the device: Optical
• Test class type 2: Yes
• Protection degree (IP): IP20

Reference. LEGRAND 412224

The discount applied to the PVP is -76%

Transient overvoltage limiter type T2, 3P+N, 20 kA, 320VA for the general protection of insensitive equipment in three-phase installations.

This limiter complies with all the regulations required for the protection of transient overvoltages in three-phase installations.

Surge suppressor with pluggable cartridges and status indicators, green, surge suppressor in operation and orange cartridges to replace.

Technical characteristics

• Type 2 (T2) Low Voltage Transient Surge Arresters
• Neutral regimes: TT, TNC, TNS.
• Number of poles: 3P+N
• Number of modules: 4.
• Complies with EN/IEC 61643-11 standards
• Number of conductors (without earth connection): 4
• Rated discharge current (8/20): 5 kA
• AC Rated Voltage: 400V
• AC maximum continuous voltage: 320 V
• L-N protection level: 1.2 kV
• Protection level N-PE: 1.5 kV
• Built-in Backup Fuse: No
• Mounting method: Top hat profile rail 35 mm
• Maximum rigid conductor cross section (single/multi-conductor): 35 mm²
• flexible conductor cross section (finely stranded): 25 mm²
• With telecommunication contact: No
• Signaling on the device: Optical
• Test class type 2: Yes
• Protection degree (IP): IP20

Reference. LEGRAND 412225

The discount applied to the PVP is -76%

Type 2 - Class II 2-pole transient overvoltage protection device (1P + N) in 1 15 kA module.

Type 2 - Class II 2-pole transient overvoltage protection device (1P + N) in 1 15 kA module.

CS of CIRPROTEC is the range of devices, in monobloc format, to derive transient induced surges (Type 2 / Class II), according to standard IEC 61643-11.

In single-phase installations, the CS21-15 / 230 is suitable as a second protection step in distribution boards when there are type 1 installed protectors, or as a first step in shops, residences or other applications not exposed to direct discharges and without external Protection against lightning.

Technical characteristics of the CIRPROTEC CS21-15 / 230 - 77705213

• Internal configuration: 1P + N
• Number of poles: 2
• Number of DIN modules: 1 (narrow model)
• Installation: (L-N)
• Format: Monobloc
• Network configuration: TT, TNS, TNC
• Standards Product: IEC 61643-11; EN 61643-11
• Certifications: CE, RoHs
• Classification according to EN 61643-11: Type 2
• Classification according to IEC 61643-11: Class II
• Insulation material and class: PC, V-0
• Housing Color: Gray RAL 7035
• Temperature range: -40 ° C ... +80 ° C
• Mains voltage: 230/400 [V]
• Rated voltage AC 50-60 Hz (L-N) -Un (L-N): 230 V
• Maximum operating voltage (L-N) -Uc (L-N): 275 V
• Maximum operating voltage (L-PE) -Uc (L-PE): 255 V
• Maximum discharge current (8/20) (L-N) -Imax (L-N): 15 kA
• Maximum discharge current (8/20) (N-PE) -Imax (N-PE): 15 kA
• Rated discharge current (8/20) (L-N) -In (L-N): 5 kA
• Rated discharge current (8/20) (N-PE) -In (N-PE): 5 kA
• Level of protection in tension (L-N) to In-Up (L-N): ≤ 1,2 kV
• Voltage protection level (N-PE) to In-Up (N-PE): ≤ 1,5 kV
• Maximum pre-fuse: 63 A [gL]
• Short circuit capacity (Isccr): 10 kA
• Response time (L-N) -tA (L-N): 25 ns
• Response time (N-PE) -tA (N-PE): 100 ns
• Remote indication: No
• Final visual indication of life: Yes
• Thermal dynamic shut-off (L-N): Y
• Residual Current (IGND): 0.01 mA

​Reference. CIRPROTEC CS21-15 / 230 - 77705213

The discount applied to the PVP is -64%

Type 2 - Class II 4-pole transient overvoltage protection device (3P + N) in 4 module of 15 kA.

CS of CIRPROTEC is the range of devices, in monobloc format, to derive transient induced surges (Type 2 / Class II), according to standard IEC 61643-11.

In three-phase installations, the CS4-15 / 400 is suitable as a second protection step in distribution boards when there are type 1 installed protectors, or as a first step in shops, residences or other applications not exposed to direct discharges and without external Protection against lightning.

Technical characteristics of the CIRPROTEC CS4-15/400 - 77705221

• Internal Configuration: 3P + N
• Number of poles: 4
• Number of DIN modules: 4
• Installation: (L1-L2-L3-N-PE)
• Format: Monobloc
• Network configuration: TT, TNS
• Standards Product: IEC 61643-11; EN 61643-11
• Certifications: CE
• Classification according to EN 61643-11: Type 2
• Classification according to IEC 61643-11: Class II
• Insulation material and class: PC + FV, UL 94 V-0
• Housing Color: Gray RAL 7035
• Temperature range: -40 ° C ... +80 ° C
• Mains voltage: 230/400 [V]
• Rated voltage AC 50-60 Hz (L-N) -Un (L-N): 230 V
• Rated voltage AC 50-60 Hz (L-L) -Un (L-L): 400 V
• Maximum operating voltage (L-N) -Uc (L-N): 275 V
• Maximum operating voltage (N-PE) -Uc (N-PE): 440 V
• Maximum discharge current (8/20) (L-N) -Imax (L-N): 15 kA
• Rated discharge current (8/20) (L-N) -In (L-N): 5 kA
• Level of protection in tension (L-N) to In-Up (L-N): ≤ 1,2 kV
• Voltage protection level (N-PE) to In-Up (N-PE): ≤ 1,5 kV
• Maximum pre-fuse: 63 A [gL]
• Short-circuit capacity-Isccr: 10 kA
• Response time (L-N) -tA (L-N): 25 ns
• Response time (N-PE) -tA (N-PE): 100 ns
• Remote indication: No
• Final visual indication of life: Yes

​Reference. CIRPROTEC CS4-15/400 - 77705221

The discount applied to the PVP is -59%