Wide modular contactor with 4 Poles x 100 A and 38 kW of power, with 4 normally open contacts (4NO).

The use of these modular contactors is to connect and cut non-inductive loads and low inductive loads, resistors, household appliances, etc.

They are mainly used in 50/60 Hz alternating current installations, especially in electrical appliances or similar devices with low induction load and electromotive load control.

Specifications:

• Rated operational current in AC7 category A: 100A
• Operating power 230V in AC7 in category A: 38 kW
• Rated insulation voltage: 400 V
• Control circuit voltage in a.c.: 230 V
• Rated frequency: 50/60 Hz
• Durability: 100,000 mechanical operations and 30,000 electrical operations
• Contact type: 4NO - 4 normally open contacts

The WERDEN modular range of contactors is an economical and professional solution for any type of installation in which the highest levels of demands are required.

Reference. WERDEN WE-9268

Narrow modular switch 1 module 20A and contacts 1NO + 1NC (1 normally open + 1 normally closed).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-20/11-230

Narrow modular switch 1 module 20A and contacts 2NO (2 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-20/20-230

Modular contactor 2 modules 20A and contacts 4NO (4 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-20/40-230

Modular contactor 2 modules 25A and contacts 4NO (4 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-25/40-230

Modular contactor 2 modules 40A and contacts 2NO (2 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-40/20-230

Modular contactor 3 modules 40A and contacts 4NO (4 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-40/40-230

Modular contactor 2 modules 63A and contacts 2NO (2 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-63/20-230

Modular contactor 3 modules 63A and contacts 4NO (4 normally open).

A contactor designed to intervene in the control of power circuits working with a voltage of 230V circuits and 50 / 60Hz at a temperature of -5 ° C to + 60 ° C.

Built according to the standard IEC61095.

A product of CHINT Electric, third international manufacturer of low-voltage electrical equipment with more than 10,000 references and solutions for projects in the domestic, commercial and industrial sector.

Reference. CHINT NCH8-63/40-230

Contactor 230V, 25A, 2NA. They are used for the control of heating circuits, lighting, ventilation, etc ...

Specifications:

• Built to NF EN 61095
• Number of modules 1
• Type of contact 2NA
• Control circuit voltage in AC 230 V
• Rated insulation and operating voltage in alternating 250 V
• Call consumption 15 VA and maintenance consumption 5 VA

The HAGER modular range allows the combination of protection switchgear (circuit breakers, differentials,...) and modular switchgear (contactors, relays,...) with a uniform, ergonomic and functional aesthetics of easy installation and clear product identification thanks to the Label holder, which allows to insert texts and images for the correct signaling of the circuits.

Reference. HAGER ESC225