2 Touch timer button recessed threads mechanism box or surface.

Characteristics:

• Recessed box or surface mounting mechanism
• 2-wire Installation: Return phase Lamp
• Valid for incandescent, halogen and extractors
• Led light remains permanently lit
• Resettable anytime
• Security screws to prevent theft
• Color: White

Technical characteristics:

• Voltage 230V ~ 50Hz
• Incandescent and Halogen 230V 40W ~ 500W
• MBT halogen 40W ~ 500W electronic transformers (type L)
• MBT halogen 40W ~ 400W ferromagnetic transformers
• Extractors 36W ~ 100VA
• Fluorescence not supported
• Low consumption lamps or LEDs not supported
• Contactor not supported
• Timing 30sec - 12min

Reference. DINUY PT EMP 004

The discount applied to the PVP is -12%

The discount applied to the PVP is -60%

The discount applied to the PVP is -60%

The discount applied to the PVP is -60%

The discount applied to the PVP is -60%

Twilight switch surface with integrated light sensor an opening angle of about 180 and adjustable brightness value from the outside without opening the device.

Functional description:

• Twilight switch with integrated light sensor
• Delay fixed connection and disconnection
• to prevent mis-caused by flashes, car headlights, etc.
• Ability to pass the cable behind and below
• Cover with locking function during opening for easy installation of the device
• set screws
• Large terminal compartment
• Ability to adjust the brightness value from the outside without opening the device
• Wide angle of incidence of light (approx. 180 degrees)
• Brightness switching stepless

Technical characteristics:

• Supply 220-230 V AC
• Frequency 50-60 Hz
• Number of Channels 1
• Standby power consumption 0.6 W ~
• Range dimming 5-200 lx
• 15 preset brightness range lx
• Switching delay 40 s
• Off delay 40 s
• Contact type switch
• Switching output potential-free (230 V)
• Mount Type Wall or pole mounting
• Type of connection Screw terminals
• Power connection
• 16 A (230 V AC, cos φ = 1), 10 AX (230 V AC, cos φ = 0.3)
• Incandescent lamp load 2300 W
• Halogen lamp load 2300 W
• Fluorescent lamp load (conventional) not corrected 2300 VA
• Fluorescent lamp load (conventional) series-corrected 2300 VA line
• Fluorescent lamp load (conventional losses) 2300 VA duo connection
• Fluorescent lamp load (conventional) series-corrected 400 VA parallel 42 uF
• Compact fluorescent energy saving lamps 9 x 7 W, 7 x 11 W, 7 x 15 W, 7 x 20 W, 7 x 23 W
• Symbol VDE certification
• Housing material and insulation and self-extinguishing thermoplastic resistant to high temperatures
• Ambient temperature -35 ° C ... +55 ° C
• Degree of protection IP 55
• Protection class II

Reference. THEBEN LUNA 126 star

The discount applied to the PVP is -35%

Level relay for DIN rail and well or tank control with 2 or 1 level control function.

Specifications:

• Function: 2 or 1 levels of control
• Connection terminals: A1-A2
• Voltage range: AC / DC 24-240V (50-60Hz)
• Input: max 2VA
• Voltage tolerance: -15%; + 10%
• Sensitivity (resistance input): adjustable between 5 kΩ -100 kΩ
• Electrode voltage: Max. AC 5V
• Probe current: AC <0.1 mA
• Response time: Max. 400 ms
• Maximum cable length: 800 m (25kΩ sensitivity), 200 m (100 kΩ sensitivity)
• Maximum probe cable length: 400 nF (25kΩ sensitivity), 100 nF (100 kΩ sensitivity)
• Delay time: adjustable, 0.5 -10 s
• Delay time after power on: 1.5 s
• Setting accuracy: + - 5%
• Temperature coefficient: 0.05% / 0C, at = 200C (0.05% 0F, at = 680F)
• Output: 1 × SPDT
• Output current: 10A / AC1
• Connection voltage: 250VAC / 24VDC
• Minimum DC breaking capacity: 500mW
• Output indication: Red Led
• Mechanical Life: 1 × 107
• Electrical Life: 1 × 106
• Reset time: Max. 200 ms
• Working temperature: 20 ºC ~ +55 ºC
• Storage temperature: -35 ºC ~ +75 ºC
• DIN rail mounting: Din rail EN / IEC 60715
• Degree of protection: IP40 for front panel / IP20 terminals
• Overvoltage category: III
• Pollution degree: 2
• Maximum cable size: Rigid cable: Max. 1 x 2.5 mm or 2 x 1.5 mm. Coated: Max. 1 x 2.5 mm (AWG 12)
• Dimensions: 90 × 18 × 64mm
• Weight: 81g
• Standard IEC / EN 62055-1, IEC / EN61010-1

The discount applied to the PVP is -60%

Single-phase pool electrical panel from 1 to 1.5 CV - 230V with regulation from 9 to 14 A, already assembled and wired in a waterproof box without transformer.

The frame is made up of:

• IP65 waterproof box with transparent door.
• A differential 2 poles 40A 30mA.
• A motor protector with regulation from 9 to 14 A.
• A watch with reserve.
• A two position toggle switch.
• An industrial contactor of 20 A - 2 poles at 230V.

The discount applied to the PVP is -50%

Submersible dirty water pump with a motor power of 0.36 kW / 0.48 CV and a maximum depth of 5 meters.

Specifications:

• Power: 360 W
• Cable length: 10 m
• Motor power: 0.36 kW / 0.48 CV
• Max flow: 7500 l / h
• Maximum height: 5 m
• Maximum depth: 5 m
• Cable: H05RN-F3G 0.75 mm2
• Maximum foreign particle size: 35mm
• Tube diameter: 25mm / 30mm / 40mm
• Certificates: ROHS / LVD / GS / CE / EMC
• Protection: IPX8

The discount applied to the PVP is -60%

Submersible dirty water pump with a motor power of 0.75 kW / 1 CV and a maximum depth of 7 meters.

Specifications:

• Power: 750W
• Cable length: 10 m
• Motor power: 0.75 kW / 1 CV
• Max flow: 12,500 l/h
• Maximum height: 8m
• Maximum depth: 7m
• Wire: H05RN-F3G 0.75mm2
• Maximum size of foreign particles: 35 mm
• Tube diameter: 25.4mm/31.75mm/38.1mm
• Certificates: ROHS/LVD/GS/CE/EMC
• Protection: IPX8

The discount applied to the PVP is -60%