The discount applied to the PVP is -60%

Analogue time programmer for DIN rail installation, with 70-hour power reserve and 24-hour program - 96 On / Off and 15-minute interval.

This time switch is suitable for the daily programming of an electrical circuit, improving its management and achieving significant energy savings.

Ideal for example in the control and management of heating, ventilation, lighting, etc ...

Technical data:

• Programming: 96 on / off
• Program: 24 hours
• Intervals: 15 minutes
• Reserve: 70 hours
• Nominal frequency: 50 / 60Hz
• Maximum consumption: 2.5VA
• Contacts: 1 NO (normally open)

The discount applied to the PVP is -60%

Digital time programmer switch for DIN rail installation, with 100 hours power reserve and 1 week program - 128 On / Off.

This time switch is suitable for daily programming of an electrical circuit, improving its management, achieving significant energy savings and providing independent control to turn on and off the electrical circuit.

Ideal for example in the control and management of heating, ventilation, lighting, etc ...

Technical data:

• Programming: 1 week - 128 on / off
• Program: 24h + week
• Minimum unit of configuration: 1 minute
• Performance preset: <2s / day
• Power: 3,500 W
• Nominal frequency: 50 / 60Hz
• Maximum consumption: 4VA
• Contacts: 1 NO (normally open) + 1 NC (normally closed)
• LCD screen
• Type of lighting: Manual and Automatic

The discount applied to the PVP is -60%

Analogue time programmer switch for DIN rail installation, with 150-hour power reserve and 24-hour program - 48 On / Off and 30-minute interval.

This time switch is suitable for the daily programming of an electrical circuit, improving its management and achieving significant energy savings.

Ideal for example in the control and management of heating, ventilation, lighting, etc ...

Technical data:

• Programming: 48 on / off
• Program: 24 hours
• Intervals: 30 minutes
• Reservation: 150 hours
• Nominal frequency: 50 / 60Hz
• Maximum consumption: 2.5VA
• Contacts: 1 NO (normally open) - 1NC (normally closed)

The discount applied to the PVP is -60%

Astronomical lane clock / programmer with reserve, 8 on / off programs and 3-year memory.

This Programmer / Astronomical Clock has:

• Integrated calendar: From 2016 to 2066.
• The program can be switched on / off according to the sunrise / sunset time.
  • 1. Longitude range: East / West 0º ~ 180º, one degree increment.
  • 2. Latitude range: 0 ~ 68, one degree of increment.
  • 3. Time zone range: 12 ~ -12.
• Start and end of daylight saving time in Europe and the United States.
• It has eight groups of programs, with their corresponding settings, which can be changed or not according to the astronomical time.
• User can check sunrise / sunset time based on longitude, latitude, date and default time zone.
• It has a built-in lithium battery, which will start working in the event of a power outage.
• It has a data card port. The date can be copied, as well as the current time, latitude and longitude, daylight saving time, program on / off time, etc.

Specifications:

• Rated voltage: AC 220V (85-110%) 50Hz
• On / off settings: 8 groups of on / off programs
• Minimum setting: 1 Minute
• Contact load capacity:
  • Resistive load: 16 A / 250 V AC COSф = 1
  • Reactive load: 10 A / 250 V AC COSф = 0.6
• Number of contacts: 1 change
• Contact resistance between contacts: ≤100 MΩ
• Insulation resistance: ≥100 MΩ / 500 V
• Memory after power failure: 3 years
• Power consumption: ≤5 VA
• Operating temperature: -10˚C ~ 50˚C (No freezing)
• Ambient humidity: 35 ~ 85% RH
• Storage temperature: -10˚C ~ 60˚C
• Weight: 130g

The discount applied to the PVP is -60%

Multifunction timer with 1 normally open contact 1 NO (8A).

Specifications:

• Voltage: 400V
• Number of poles: 3 Poles
• Contacts: 1 NO (8A) normally open
• Time range: 0.2 s - 10 s
• Adjustable overvoltage: Uvo = 1.05 - 1.25 A
• Adjustable Undervoltage: Uve = 0.75 - 0.95 A
• Phase-to-phase and sequence control

The discount applied to the PVP is -60%

Staircase Installation installation on DIN rail 16 A - 230 V.

Their installation scheme coincides with that of most existing market timers.

Functional description:

• Electromechanical timer ladder
• 4-wire for basic lighting
• 3-wire connection without basic lighting (no longer permitted for new installations)
• reconnectable
• No power consumption at rest
• Rocker switch for constant illumination
• High reliability through synchronous motor drive
• Simple time regulation and direct reading of delay time on an absolute scale
• Precision mechanism for adjusting a time of snug fitting
• Very high immunity to interference

Technical data:

• Power supply 230 V AC
• Frequency 50 Hz
• 1 modules width
• DIN Rail Mounting Type
• 0 W Standby power consumption
• Neon lamp load 50 mA
• Setting range time 1-7 min
• Cable connection type 3/4
• 3/4 wires Yes
• Secondary switching After 30 s
• Contact type switch
• Opening width> 3 mm
• Switching output potential-free (230 V)
• Incandescent lamp load. / 2300 W halogen
• Fluorescent lamp load (conventional losses) 2300 VA duo connection
• Fluorescent lamp load (conventional) series-corrected 1300 VA parallel 70 uF
• Compact fluorescent energy saving lamps 150 W
• LED lamp <2 W = 30 W o> 2 W <8 W = 90 W
• Fluorescent lamp load (ECG) 600 W
• Fluorescent lamp load (conventional) series-corrected 2300 VA line
• Power connection
• 6 AX (230 V AC, cos φ = 0.3), 16 A (230 V AC, cos φ = 1)
• Switch Rocker switch for constant illumination
• Symbol VDE certification
• Housing material and insulation and self-extinguishing thermoplastic resistant to high temperatures
• Ambient temperature -10 ° C ... +50 ° C
• Protection class II
• Degree of protection IP 20

Reference THEBEN ELPA 8

The discount applied to the PVP is -61%

Ladder minute for installation on DIN rail 16A - 230 V. It allows to save energy and ensure the operation of the load. Adjustable timing from 30s to 10 min.

Its installation scheme coincides with that of most of the existing minute holders in the market.

Technical characteristics:

• Architecture: DIN Rail Mounting
• Functions: with forced ON / automatic selector
• Configuration: NA Contact
• Rated frequency 50/60 Hz
• Rated operating voltage in alternating 230 V
• Control circuit voltage in AC 230 V
• Operating voltage 230 V ~
• Assigned employment current in AC1 16 A
• 100 mA standby intensity
• Pot. max. in fluo do not compensate. per 3600 VA output
• Power consumption 1 VA
• Total power dissipated under conditions of nominal intensity 2 W
• Power dissipated by 0.25 W coil
• 230 V supply voltage
• Width of installed product 17.5 mm
• Width DIN rail mounting device (RMD) 1 modules
• Management of fluorescent lamps max. 3600 VA
• Max.power with parallel compensated fluorescent tubes 1000 VA
• Management of incandescent and halogen lamps 230 V max. 2300 W
• Maximum power with 2300 W incandescent lamps
• Installation, mounting DIN rail
• Conductor section (flexible) 1… 6 mm²
• Conductor section (rigid) 1.5… 10 mm²
• Rigid cable connection section 1.5 / 10 mm²
• Flexible cable connection section 1/6 mm²
• Connection type Screw cage terminal
• 3 and 4 wire connection
• Number of contacts 1
• Contact type 1 NO - For 3 and 4-circuits (automatic detection) - With threaded terminals
• 30 second timing range
• Delay time to disconnection, adjustable 30 seconds to 10 minutes
• IP20 IP protection index

Reference EMN001 HAGER

The discount applied to the PVP is -75%

Switch modular schedule with daily sphere 16A, 1 NO, No Reserve.

This time switch is suitable for daily programming of an electrical circuit, improving management and achieving significant energy savings.

Ideal for example in the control and management of heating, ventilation, lighting, etc...

Built according to the EN60730 standard.

Technical characteristics:

• Built according to the EN60730 standard.
• Number of modules 1
• daily cycle
• Precision programming 15 minutes
• Contact type 1 changeover
• Supply voltage 230 V AC
• Max. with filament lamps 900 W

Reference EH010 HAGER

The discount applied to the PVP is -65%

Switch modular schedule with daily sphere 16A, 1 NO contact and with reserve of 200 hours.

This time switch is suitable for daily programming of an electrical circuit, improving management and achieving significant energy savings.

Ideal for example in the control and management of heating, ventilation, lighting, etc...

Technical characteristics:

• Built according to the EN60730 standard.
• Number of modules 1
• Power reserve of 200 hours
• daily cycle
• Precision programming 15 minutes
• Contact type 1 changeover
• Supply voltage 230 V AC
• Max. with filament lamps 900 W

Reference HAGER EH011

The discount applied to the PVP is -69%