12-channel 16A binary switching actuator for installation on a DIN rail.

• This series of actuators comply with European safety standards and protocols for high power KNX equipment.
• Some of its main characteristics are the use of 16A magnetic relays, low consumption and a long useful life.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Channels: 12
• Bus voltage: 21~30 V DC
• Bus communication: KNX/EIB
• DC: 15 mA
• Commutator Rated Voltage: 250V AC
• Switch nominal current: 16A load and lighting and max. 500A peak current (150µs)
• Certificates: CE, ROHS and KNX
• Installation: standard 35mm DIN rail
• KNX terminals: Wire core diameter: (Red/grey) 0.6 - 0.8 mm
• Output Terminals: Line in and line out for each 2.5 - 4mm² channel
• Capacity: <300µF
• Operating temperature: -5ºC ~ 45ºC, storage temperature: -20ºC ~ 60ºC
• Operating Relative Humidity: Up to 90%, Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

Universal 2-channel actuator / regulator for installation on a DIN rail.

• This series of actuators comply with European safety standards and protocols for KNX equipment.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Channels: 2
• Output current: 3 A/channel
• Voltage: 21~30V DC
• Communication: KNX/EIB
• Dynamic current: < 15mA
• Static current: < 5mA
• Rated voltage: 220~250V AC
• Protection: IP20
• Measurements: 216 x 90 mm
• DIN rail installation: Yes
• Output Terminals: Line in and out for each 2.5 - 4 mm2 channel
• Operating temperature: -5ºC ~ +45ºC
• Storage temperature: -20 ºC ~ +60 ºC
• Operating Relative Humidity: Up to 90%
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

Universal 4-channel actuator / regulator for installation on a DIN rail.

• This series of actuators comply with European safety standards and protocols for KNX equipment.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Channels: 4
• Output current: 1.5 A/channel
• Voltage: 21~30V DC
• Communication: KNX/EIB
• Dynamic current: < 15mA
• Static current: < 5mA
• Rated voltage: 220~250V AC
• Protection: IP20
• Measurements: 216 x 90 mm
• DIN rail installation: Yes
• Output Terminals: Line in and out for each 2.5 - 4 mm2 channel
• Operating temperature: -5ºC ~ +45ºC
• Storage temperature: -20 ºC ~ +60 ºC
• Operating Relative Humidity: Up to 90%
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

Universal 6-channel actuator / regulator for installation on a DIN rail.

• This series of actuators comply with European safety standards and protocols for KNX equipment.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Channels: 6
• Output current: 1 A/channel
• Voltage: 21~30V DC
• Communication: KNX/EIB
• Dynamic current: < 15mA
• Static current: < 5mA
• Rated voltage: 220~250V AC
• Protection: IP20
• Measurements: 216 x 90 mm
• DIN rail installation: Yes
• Output Terminals: Line in and out for each 2.5 - 4 mm2 channel
• Operating temperature: -5ºC ~ +45ºC
• Storage temperature: -20 ºC ~ +60 ºC
• Operating Relative Humidity: Up to 90%
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

KNX dimmer decoder with 4 5A RGBW outputs for monochrome and RGBW LED strips.

• Turning off and turning on the led luminaire
• relative regulation
• absolute regulation
• Status report and error report
• 15 scene setup
• Stair lighting function

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Input bus operating voltage: 21-30 V DC, via KNX/EIB bus
• Input voltage: 12-36V DC
• Channels: 4 channels
• Rated current: 5A x4 channels
• Charging voltage: 12-36 V DC (direct voltage)
• Security: Protection against short circuits, surges and excess temperature.
• EIB/KNX: EIB bus connection terminal
• Inputs/Outputs: Screwless connection terminals
• Red button and indicator: To assign the physical address
• Flashing green indicator: Indicates the application layer that is running
• Indicators for the outputs: Indicates the status of the output per channel. If the indicator lights up, it means that the channel has an output. If it is off, it means it has no output.
• Manual adjustment: Turn the device on or off by a quick press and hold for relative regulation.
• OT indicator: Indicates an excess of temperature, above 70ºC
• OV indicator: Indicates overvoltage, above 40 V DC
• Protection class: IP20 (EN 60529)
• Operating Temperature: -5ºC~45ºC
• Humidity: <93%, except condensation

The discount applied to the PVP is -60%

KNX dimmer decoder with 4 5A RGBW outputs for DIN rail monochrome and RGBW LED strips.

• Turning off and turning on the led luminaire
• relative regulation
• absolute regulation
• Status report and error report
• 15 scene setup
• Stair lighting function

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Input bus operating voltage: 21-30 V DC, via KNX/EIB bus
• Input voltage: 12-36V DC
• Channels: 4 channels
• Rated current: 5A x4 channels
• Charging voltage: 12-36 V DC
• Security: Protection against short circuits, surges and excess temperature.
• EIB/KNX: EIB bus connection terminal
• Inputs/Outputs: Screwless connection terminals
• Red button and indicator: To assign the physical address
• Flashing green indicator: Indicates the application layer that is running
• Indicators for the outputs: Indicates the status of the output per channel. If the indicator lights up, it means that the channel has an output. If it is off, it means it has no output.
• Manual adjustment: Turn the device on or off by a quick press and hold for relative regulation.
• OT indicator: Indicates an excess of temperature, above 70ºC
• OV indicator: Indicates overvoltage, above 40 V DC
• Protection class: IP20 (EN 60529)
• Operating Temperature: -5ºC~45ºC
• Humidity: <93%, except condensation

The discount applied to the PVP is -60%

Actuator for blinds, blinds and awnings 4 channels 10A for installation on DIN rail.

• This KNX/EIB blind actuator complies with European safety standards regarding the internal use of a 10A magnetic relay.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Channels: 4
• Voltage: 21~30V DC
• Communication: KNX/EIB
• Dynamic current: < 15mA
• Static current: < 5mA
• Rated voltage: 250V AC
• Protection: IP20
• Measurements: 143 x 90 mm
• DIN rail installation: Yes
• Output Terminals: Line in and out for each 2.5 - 4 mm2 channel
• Operating temperature: -5ºC ~ +45ºC
• Storage temperature: -20 ºC ~ +60 ºC
• Operating Relative Humidity: Up to 90%
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

Fan coil actuator and valves to control air conditioners, fans, compressors and underfloor heating.

• This actuator is used to control air conditioners, fans, compressors and underfloor heating.
• It can work on different panels and the channels are configured through the ETS program.
• Supports up to 7 digital temperature sensors.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Voltage: 21~30V DC
• Communication: KNX/EIB
• Bus current: < 20 mA
• Outputs: 8A (AC) / 5A (DC)
• Certificates: CE, ROHS and KNX
• Installation: standard 35mm DIN rail
• KNX terminals: Wire core diameter: (Red/grey) 0.6-0.8 mm
• Sensor temperature: 2-wire digital temperature sensor
• Operating temperature: -5ºC~45ºC
• Operating relative humidity: up to 90%
• Storage temperature: -20ºC~60ºC
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

Fan coil actuator for installation on a DIN rail.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Voltage: 21~30V DC
• Communication: KNX/EIB
• Bus current: < 20 mA
• Outputs: 8A (AC) / 5A (DC)
• Installation: standard 35mm DIN rail
• KNX terminals: Wire core diameter: (Red/grey) 0.6-0.8 mm
• Single Core Diameter
• Weight: 180g
• Dimensions: 90mm x 72mm x 66mm
• Two-wire digital temperature
• TS/C Sensor 1.0 (18B20)
• Operating temperature: -5ºC~45ºC
• Operating relative humidity: up to 90%
• Storage temperature: -20ºC~60ºC
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%

3x3x10 mm temperature transmitter probe for 4-channel binary input.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Accessory for binary input 4 channels
• Type: NTC
• Accuracy 2%
• WEIGHT: 100g
• Length: 2.5 Meters
• Dimensions: 3 x 3 x 10mm

The discount applied to the PVP is -60%