50W push dim adjustable DALI driver with constant voltage.

• Adjustable driver.
• Maximum output power: 50W.
• Single channel DC current output 250-1500 mA.
• DIP switches to set the operating current.
• Class II power supply and fully insulated plastic housing.
• Great power factor and efficiency.
• To turn on/off or regulate LED luminaires of a single color.
• Integrated DALI interface and support for DALI DT6 devices.
• Compatible with universal DALI master that supports DT6 commands.
• Error report function.
• Protection: IP20.
• Suitable for indoor use.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• LED channel: 1
• Available output currents: 250 mA 300 mA 350 mA 400 mA 450 mA 500 mA 600 mA 700 mA
• Output DC voltage range: 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V
• Available output currents: 800 mA 900 mA 1000 mA 1100 mA 1200 mA 1300 mA 1400 mA 1500 mA
• Output DC voltage range: 8-48 V 8-48 V 8-48 V 8-46 V 8-41 V 8-38 V 8-35 V 8-33 V
• Output current tolerance: ±5%
• Rated output power: 50 W maximum
• Input voltage range: 200-240 V AC
• Input frequency range: 50/60 Hz
• Power factor: >0.9
• Total harmonic distortion: THD =15(at full load/230 V AC)
• Alternating current: 0.27 A at 230 V AC
• Maximum peak voltage: Cold start 2 A maximum at 230 V AC
• Leakage current: <0.5mA/230V AC
• Dimming interface: DALI/PUSH
• Dimming range: 0%-100%
• Regulation method: Pulse Width Modulation
• Short circuit, overvoltage and overheating: They recover automatically after solving the faults.
• Operating temperature: -20ºC~45ºC
• Maximum housing temperature: 75ºC
• Operating Humidity: 10% ~ 95% RH non-condensing
• Storage temperature and humidity: -40ºC ~ 80ºC, 10% ~ 95% relative humidity
• Safety standards: ENEC EN 61347-1 and EN61347-2-13
• Withstand voltage: I/P-O/P: 3.75 KV AC
• Insulation resistance: I/P-O/P: 1000M Ohms/ 500 V DC/ 25ºC/ 70% relative humidity
• Electromagnetic compatibility emission: EN 55015, EN 61000-3-2 and EN 61000-3-3
• Electromagnetic compatibility immunity: EN 61547 and EN 61000-4-2, 3, 4, 5, 6, 8, 11
• MTBF: 193.6 K h min at 230 V AC full load and 25ºC ambient temperature

The discount applied to the PVP is -60%

DALI decoder for outdoor IP67 with continuous input voltage.

• Ambient temperature: -20ºC ~ 50ºC
• It complies with the DALI UNE-EN 62386-102:2014 (IEC 62386-102) and UNE-EN 62386-207:2009 (IEC 62386-207) standards.
• It can be used with all DALI systems on the market.
• Automatic and manual DALI address setting.
• Digital indicator of the DALI address.
• It has a repeater to extend the output power unlimitedly.
• Protection degree: IP67

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Input voltage: DC 12-36V
• Output current: 4 x 5 A
• Output Power: 4 x (60-180)W
• Input voltage: DC voltage
• DALI consumption: 2mA
• Dimming range: 0.1%-100%

The discount applied to the PVP is -60%

DALI AC triac driver 2 output channels AC100-240V.

• Safety and reliability thanks to full isolation design.
• It supports both resistive and capacitive loads.
• DALI input signal.
• Compatible with a wide variety of DALI controllers.
• Two channels of AC100-240V output.
• Innovative minimum brightness adjustment function.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Input voltage: 100-240V DC
• Output voltage: AC 2 x 100-240V
• Input current: 2 x 1.2A
• Output power: 2 x 120-288W
• Measurements: 170 x 59 x 29mm

The discount applied to the PVP is -60%

Driver AC triac 4-channel regulator for DIN rail installation.

• Safe design and total isolation
• Supports both resistive and capacitive loads
• Compatible with a wide variety of DALI master controllers
• 4 output channels AC 100-240 V
• DIN rail installation

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Input voltage: 100-240V DC
• Output voltage: 4 x AC 100-240V
• Maximum charging current: 4 x 1.5 A
• Maximum load power: 4 x 400 W at 230 V - 4 x 200W at 110V
• DALI consumption: <2mA
• Measurements: 145.4 x 90 x 66.4mm
• Protection degree: IP20

The discount applied to the PVP is -60%

4-in-1 multifunction decoder with DALI, AC push, 0/1-10V interfaces and phase-cut dimming.

• 4-in-1 multifunction dimmer with DALI, AC push, 0/1-10V interfaces and phase cut dimming.
• DIP switch to select the different regulation interfaces.
• Single channel output 12-36 V DC, with a maximum of 20 A.
• Complies with DALI IEC 62386-102 and IEC 62386-207 standards.
• Compatible with all DALI systems on the market.
• The DALI master can assign an address.
• Works with a power repeater to increase output power unlimitedly.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Input voltage: DC 12-36V
• Output current: 1 x 20 A
• Output Power: 1 x (240-720)W
• Input voltage: DC voltage
• Regulation input: DALI, AC Push, 0 / 1-10 V and Phase Cut
• DALI consumption: 2mA
• Dimming range: 0%-100%

The discount applied to the PVP is -60%

24V 100W multifunction driver with triac / DALI / AC Push / 0/1-10V dimming interface.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• LED channel: 1 (with two groups of terminals connected in parallel)
• DC output voltage: 24V DC
• Maximum output current: Max. 4.16 A/terminal group, group 1+group 2=4.16 A
• Current tolerance: ±1%
• Rated power: 100 W maximum
• Input voltage range: 200-240 V AC~50/60 Hz
• Input power factor: >0.95 at 230 V AC
• Total harmonic distortion: THD =15% (at full load/230 V AC)
• Alternating current: 0.5 A at 230 V AC
• Maximum peak voltage: Cold start 50 A maximum at 230 V AC
• Leakage current: <0.5mA/230V AC
• Dimming interface: DALI/Push+Triac+0/1-10 V
• Dimming range: 0.1%-100%
• Regulation method: Pulse Width Modulation
• Operating temperature: -25ºC~45ºC
• Maximum housing temperature: 90ºC
• Operating Humidity: 10%~95% RH non-condensing
• Storage temperature and humidity: -40ºC~80ºC, 10%~95% relative humidity
• Safety standards: EN 61347-1 and EN61347-2-13
• Withstand voltage: I/P-O/P: 3.75 KV AC
• Insulation resistance: I/P-O/P: 1000M Ohms/ 500 V DC/ 25ºC/ 70% relative humidity
• Electromagnetic compatibility emission: EN 55015, EN 61000-3-2 and EN 61000-3-3
• Electromagnetic compatibility immunity: EN 61547 and EN 61000-4-2, 3, 4, 5, 6, 8, 11
• MTBF: 193.6 K h min at 230 V AC full load and 25ºC ambient temperature
• Size: 240 x 72 x 36mm

The discount applied to the PVP is -60%

Monochrome 1-group DALI controller made of touch glass panel.

• Tactile.
• Black and white glass panel.
• It complies with the DALI IEC 62386-102 and IEC62386-207 protocol standard.
• The starting DALI address (0-63) to be controlled can be determined using the rear rotary selectors.
• It has a lighting area that can be turned on/off or regulated. Each zone can control one DALI address.
• 4 scenes can be saved.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Type: Monocolor
• Groups: 1
• Output signal: DALI signal
• Power: DC 12-24V
• Consumption: 200mA
• Temp. operating: 0º - 40º
• Relative humidity: 8% to 80%

The discount applied to the PVP is -60%

Monochrome DALI controller 3-4 groups made in touch glass panel.

• Tactile.
• Black and white glass panel.
• It complies with the DALI IEC 62386-102 and IEC62386-207 protocol standard.
• The starting DALI address (0-63) to be controlled can be determined using the rear rotary selectors.
• It has a lighting area that can be turned on/off or regulated. Each zone can control one DALI address.
• 4 scenes can be saved.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Type: Monocolor
• Groups: 3-4
• Output signal: DALI signal
• Power: DC 12-24V
• Consumption: 200mA
• Temp. operating: 0º - 40º
• Relative humidity: 8% to 80%

The discount applied to the PVP is -60%

CCT 1-group DALI controller made of touch glass panel.

• Tactile.
• Black and white glass panel.
• It complies with the DALI IEC 62386-102 and IEC62386-207 protocol standard.
• The starting DALI address (0-63) to be controlled can be determined using the rear rotary selectors.
• It has a lighting area that can be turned on/off or regulated. Each zone can control one DALI address.
• 4 scenes can be saved.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Type: CCT
• Groups: 1
• Output signal: DALI signal
• Power: DC 12-24V
• Consumption: 200mA
• Temp. operating: 0º - 40º
• Relative humidity: 8% to 80%

The discount applied to the PVP is -60%

CCT 3-4 groups DALI controller made of touch glass panel.

• Tactile.
• Black and white glass panel.
• It complies with the DALI IEC 62386-102 and IEC62386-207 protocol standard.
• The starting DALI address (0-63) to be controlled can be determined using the rear rotary selectors.
• It has a lighting area that can be turned on/off or regulated. Each zone can control one DALI address.
• 4 scenes can be saved.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• Type: CCT
• Groups: 3-4
• Output signal: DALI signal
• Power: DC 12-24V
• Consumption: 200mA
• Temp. operating: 0º - 40º
• Relative humidity: 8% to 80%

The discount applied to the PVP is -60%