KNX-DALI interface-gateway for installation on DIN rail.

• The KNX/DMX gateway-recorder is not only a KNX/DMX gateway that supports both ways of control, but can also record, replay or delete the DMX program from the ETS or from the KNX panel.
• The maximum recording time is up to 4 hours.
• This module is used to control devices with integrated KNX protocol.

This standard is based on more than 24 years of experience in the market and on the predecessor systems of KNX: EIB, EHS and BatiBUS. Through the KNX transmission medium (twisted pair, radio frequency, power line or IP/Ethernet), on which all the devices are connected, communication is exchanged.

The devices connected to the bus can be both sensors and actuators used for the control of building management equipment in all possible applications: lighting, blinds / shutters, security systems, energy management, heating, ventilation and air conditioning systems, systems supervision and signaling, interfaces to services and building control systems, remote control, measurement, audio / video, control of white goods, etc.

All these functions can be controlled, supervised and signaled using a uniform system without the need for additional control centers.

Technical characteristics:

• Voltage: 21~30V DC
• Bus communication: KNX/EIB
• Dynamic current: < 12 mA
• Static current: < 5mA
• External power supply: 40mA /DC 24V
• Input/Output signal: DMX512-1990, ArtNet
• Certificates: CE, ROHS and KNX
• Installation: standard 35mm DIN rail
• KNX terminals: Wire core diameter: (Red/grey) 0.6-0.8 mm
• Output terminals: line in and out for each channel of 1 - 2.5mm2
• Operating temperature: -5ºC~45ºC
• Operating relative humidity: up to 90%
• Storage temperature: -20ºC~60ºC
• Storage Relative Humidity: Up to 93%

The discount applied to the PVP is -60%