50W push dim adjustable DALI driver with constant voltage.

• Adjustable driver.
• Maximum output power: 50W.
• Single channel DC current output 250-1500 mA.
• DIP switches to set the operating current.
• Class II power supply and fully insulated plastic housing.
• Great power factor and efficiency.
• To turn on/off or regulate LED luminaires of a single color.
• Integrated DALI interface and support for DALI DT6 devices.
• Compatible with universal DALI master that supports DT6 commands.
• Error report function.
• Protection: IP20.
• Suitable for indoor use.

DALI (Digital Addressable Lighting Interface) is a bidirectional standard in which information runs from a controller to the lighting equipment that executes orders and requests for information.

This system allows adequate management of architectural lighting, it can even be integrated as a subsystem to the most current building control protocols.

This lighting control system is a tool to reduce energy consumption in facilities, allowing its users to personalize their spaces and create comfortable environments by regulating the luminaires, adjusting and programming light scenes.

Technical characteristics:

• LED channel: 1
• Available output currents: 250 mA 300 mA 350 mA 400 mA 450 mA 500 mA 600 mA 700 mA
• Output DC voltage range: 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V 8-48 V
• Available output currents: 800 mA 900 mA 1000 mA 1100 mA 1200 mA 1300 mA 1400 mA 1500 mA
• Output DC voltage range: 8-48 V 8-48 V 8-48 V 8-46 V 8-41 V 8-38 V 8-35 V 8-33 V
• Output current tolerance: ±5%
• Rated output power: 50 W maximum
• Input voltage range: 200-240 V AC
• Input frequency range: 50/60 Hz
• Power factor: >0.9
• Total harmonic distortion: THD =15(at full load/230 V AC)
• Alternating current: 0.27 A at 230 V AC
• Maximum peak voltage: Cold start 2 A maximum at 230 V AC
• Leakage current: <0.5mA/230V AC
• Dimming interface: DALI/PUSH
• Dimming range: 0%-100%
• Regulation method: Pulse Width Modulation
• Short circuit, overvoltage and overheating: They recover automatically after solving the faults.
• Operating temperature: -20ºC~45ºC
• Maximum housing temperature: 75ºC
• Operating Humidity: 10% ~ 95% RH non-condensing
• Storage temperature and humidity: -40ºC ~ 80ºC, 10% ~ 95% relative humidity
• Safety standards: ENEC EN 61347-1 and EN61347-2-13
• Withstand voltage: I/P-O/P: 3.75 KV AC
• Insulation resistance: I/P-O/P: 1000M Ohms/ 500 V DC/ 25ºC/ 70% relative humidity
• Electromagnetic compatibility emission: EN 55015, EN 61000-3-2 and EN 61000-3-3
• Electromagnetic compatibility immunity: EN 61547 and EN 61000-4-2, 3, 4, 5, 6, 8, 11
• MTBF: 193.6 K h min at 230 V AC full load and 25ºC ambient temperature

The discount applied to the PVP is -60%