Monobloc transient overvoltage limit switch type 2, 3P + N, 15 kA, 440 / 275V for general protection of non-sensitive material in three-phase installations.
This limiter complies with all the regulations required for the protection of transient overvoltages in three-phase installations.
An overvoltage protector with medium discharge capacity, connection in parallel with the receivers to be protected and with protection secured in common mode and in differential mode.
Technical characteristics
- Built according to UNE EN 61643-11 and EN 50539-11
- Mounting Type: DIN Rail
- Number of modules: 4
- Number of half modules of 17,5mm only for device and kit: 2
- IP protection rating: IP20
- Signal current remote: No
- Rated discharge current (In): 5 kA
- You have. Max. In rég. Perm. In common mode: 440/275 V
- Rated Frequency: 50/60 Hz
- Tightening torque: 3,6 Nm
- Connection section in flexible cable: 1,5 / 16 mm²
- Connection in rigid cable: 1,5 / 25 mm²
- Height: 2000 m
- Installed product height: 86.5 mm
- Width of the installed product: 72 mm
- Depth of installed appliance: 60 mm
- Corr. Desc. Max (Imax) or Imp (Iimp): 15 kA
- Degree of pollution / IEC60664 / IEC60947-2: 2
- Protection level Up to IEC61643-1: 1 kV
- Light pilot: End of life indicator
- Storage temperature: -40 to 80 ° C
- Operating temperature: -40 to 60 ° C
Reference. HAGER SPM415D
The discount applied to the PVP is -63%