MULTI DIMMER 250, a light regulator specially designed for operation with any type of dimmable or dimmable LED using pushbuttons and in pill format to install with any pushbutton model on the market, without needing to change the model of mechanisms of the home or room to be regulated. It would also work with halogen or incandescent bulbs.
It has a regulation range from 1% to 100%, equivalent to the same percentage of energy savings. It has a memory of the last power-up even after power failure, and a low-maintenance power-on function by pressing with the light off. Minimum level setting that ensures maximum compatibility with any Dimmable LED lamp.
In pill format and easy to install in mechanism boxes or standardized register boxes, the installation diagram can be found on the front printing of the product.
CONTROL
By means of buttons of any brand on the market, Niessen, Simon, BJC, etc. It admits up to 5 with indicator light (neon or Led), and unlimited without indicator light.
FUNCTIONING
- Short press: progressively turn on or off with an elegant ramp.
- Sustained pulsation: Keeping it pressed produces the regulation, stopping when the button is released or when the maximum or minimum is reached.
- Minimum level adjustment: Turn on the lamp with a short press. Keep pressed until the minimum regulation level is reached. Once there, turn the adjustment next to the terminal in one direction or the other, until reaching an adequate and stable minimum level. This level will depend on the lamp that is being regulated and the number of lamps.
Among its features we have that it memorizes the last ignition and has a progressive on and off that prolongs the life of the lamps.
If several regulators are installed in the same register box, we must avoid that they touch each other, to avoid possible interference and overheating.
DATA SHEET
- Allowable load: Specially designed for any type of dimmable or dimmable LED
- Power supply: 230 V AC - 50 Hz. With voltage and frequency recognition
- LED power: 250W maximum dimmable LEDs for power factor f.d.p. = 1
- Protections: Overload, short circuit and overheating
- Savings: equivalent to the regulation percentage
- Certifications: CE, RoHS
- Standards: UNE-EN 55015 / A1 / A2, UNE-EN 61547 / A1, UNE-EN 60669-1 / A1 / Err and UNE-EN 60669-2-1
- Dimensions: 47x47x14 mm
The discount applied to the PVP is -65%
