Transient overvoltage limit monobloc type 2, 1P + N, 15 kA, 275V for general protection of non-sensitive material in single-phase installations.
This limiter complies with all the regulations required for the protection of transient overvoltages in single-phase installations.
A surge protector with average discharge capacity, parallel connection with receptors protect and secure protection in common mode and differential mode.
Technical characteristics
- Built according to UNE EN 61643-11 and EN 50539-11
- Mounting Type: DIN Rail
- Number of modules: 2
- Number of semi-modules of 17,5mm only for instrument and kit: 4
- Number of poles: 2 P
- IP protection rating: IP20
- Signal current remote: No
- Rated discharge current (In): 5 kA
- You have. Max. In rég. Perm. Common mode: 275 V
- Rated Frequency: 50/60 Hz
- Tightening torque: 3,6 Nm
- Connection section in flexible cable: 25 mm²
- Connection in rigid cable: 35 mm²
- Connection section in flexible earth cable: 25 mm²
- Connection section in rigid ground cable: 35 mm²
- Height: 2000 m
- Width of installed product: 36 mm
- Corr. Desc. Max (Imax) or Imp (Iimp): 15 kA
- Degree of pollution / IEC60664 / IEC60947-2: 2
- Protection level Up to IEC61643-1: 1 kV
- Light pilot: End of life indicator
- Storage temperature: -40 to 80 ° C
- Operating temperature: -40 to 55 ° C
Reference. HAGER SPM215D
The discount applied to the PVP is -73%
