1NO + 1NC auxiliary contact (1 normally open + 1 normally closed) for 3 and 4 pole electronic molded case.

The auxiliary contact will allow us to know the indication of the status of the switch contacts.

Specifications:

• Contact type: 1NO + 1NC (1 normally open + 1 normally closed)
• Compatible with: 3 Poles and 4 Poles
• Rated current: 160A
• Rated voltage: 230V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%

1NO + 1NC alarm contact (1 normally open + 1 normally closed) for 3 and 4 pole electronic molded case.

The function of the alarm contact will be the indication of the disconnection of the switch by:

• Overload
• Short circuit
• ground fault

Specifications:

• Contact type: 1NO + 1NC (1 normally open + 1 normally closed)
• Compatible with: 3 Poles and 4 Poles
• Rated current: 160A
• Rated voltage: 230V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%

Tripping coil with nominal current 160A and nominal voltage 230V for 3 and 4 pole electronic molded case.

Voltage: 110V, 220V
The trip coil will make the molded case trip when the operating voltage is between 70%~110% of the rated control voltage.

PHOTO 2 (Explanation):
Connection diagram (internal accessories are represented in the square with dashed lines).
K corresponds to the contact that connects the coil in series. Activates/deactivates with the molded case.

Specifications:

• Compatible with: 3 Poles and 4 Poles
• Rated current: 160A
• Rated voltage: 230V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%

Tripping coil with nominal current 250A and nominal voltage 415V for 3 and 4 pole electronic molded case.

Voltage: 400V, 415V
The trip coil will make the molded case trip when the operating voltage is between 70%~110% of the rated control voltage.

PHOTO 2 (Explanation):
Connection diagram (internal accessories are represented in the square with dashed lines).
K corresponds to the contact that connects the coil in series. Activates/deactivates with the molded case.

Specifications:

• Compatible with: 3 Poles and 4 Poles
• Rated current: 250A
• Rated voltage: 415V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%

Undervoltage coil with nominal intensity 160A and nominal voltage 230V for 3 and 4 Pole electronic molded case.

Functioning:

• When the operating voltage corresponds to 35%~70% of the rated voltage, the trip coil will make the molded case trip correctly.
• When the operating voltage corresponds to 85%~110% of the rated voltage, the trip coil will cause the molded case to reconnect.
• In case the operating voltage is less than 35% of the nominal voltage, the trip coil will prevent the molded case from reconnecting.

Note: For operating voltage ≥ 85% Ue, the switch opens and closes normally. The molded case will reconnect and energize only if the coil has been energized in advance. Otherwise, the box will be damaged.

PHOTO 2 (Explanation):
Connection diagram (internal accessories are represented in the square with dashed lines)
Below you can find the connection diagram of externally connected trip coils (internal accessories are shown in the square with dashed lines).
EU: AC50/60Hz 230V.

Specifications:

• Compatible with: 3 Poles and 4 Poles
• Rated current: 160A
• Rated voltage: 230V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%

Undervoltage coil with nominal intensity 160A and nominal voltage 415V for 3 and 4 Pole electronic molded case.

Functioning:

• When the operating voltage corresponds to 35%~70% of the rated voltage, the trip coil will make the molded case trip correctly.
• When the operating voltage corresponds to 85%~110% of the rated voltage, the trip coil will cause the molded case to reconnect.
• In case the operating voltage is less than 35% of the nominal voltage, the trip coil will prevent the molded case from reconnecting.

Note: For operating voltage ≥ 85% Ue, the switch opens and closes normally. The molded case will reconnect and energize only if the coil has been energized in advance. Otherwise, the box will be damaged.

PHOTO 2 (Explanation):
Connection diagram (internal accessories are represented in the square with dashed lines)
Below you can find the connection diagram of externally connected trip coils (internal accessories are shown in the square with dashed lines).
EU: AC50/60Hz 400/415V.

Specifications:

• Compatible with: 3 Poles and 4 Poles
• Rated current: 160A
• Rated voltage: 415V

Accessory compatible with the 3-pole and 4-pole electronic molded box that we sell on our website.

The discount applied to the PVP is -70%