2-lead shunt and F connectors, for SMATV signals. Due to its derivation losses (12dB), its installation in floors from 4 to 6 (type B) is recommended.
It is for indoor installation, but it is also suitable for outdoors, always inside a chest.
Main features:
- Low step losses
- Great shielding (class A), made of Zamak
- F connectors with a longer threaded section, to facilitate and ensure installation on a rack plate
- Indoor mounting
- Includes grounding screw
- Bi-directional DC step between input and output step
- Mounting flexibility: it can be installed screwed on the wall, on rack plates with nuts on their connectors, or on a DIN rail (with adapter ref. 519901 from Televes)
- Ease of threading the cable, thanks to the 10º inclination angle of the F connectors with respect to the installation wall
- Optimization of space in registers and cabinets: its connectors are always located on the same side
- Better organization of the installation: allows the passage of wiring through the rear part
- Range chainable together, using the ground screw itself, requiring a single grounding cable
- Maintains socket levels, even with long cable runs, thanks to better flatness in tap and pitch response
- Great reliability: robotic in-line manufacturing with state-of-the-art microcomponents
- Design, quality and 100% European manufacturing
Specifications:
| Margen de frecuencias |
MHz |
5-2400 |
| TERR |
SAT |
| Número de salidas |
2 |
| Plantas |
4 a 6 |
| Pérdidas de paso |
dB |
1,5 |
2 |
| Pérdidas de derivación |
20 | 19 |
| Rechazo entre derivación |
>20 |
| Paso de DC (máx.) |
|
(Sal.→Entr.) |
TELEVES brand Ref. 519324
BASIC CONCEPTS
- Distributors: The distributors or distributors are used to distribute the signal inside the house with a single input cable. This is the product that we need if with a single antenna we want to have a signal in different antenna sockets of the house.
- Mixers: The mixers are used to mix, by a single cable, different types of different signals, being the most used terrestrial and satellite signal mixer.
- Derivators: Derivators are used for distribution on the trunk of the building. The main difference with the distributors is that they have an extra output that serves to send the signal to the lower floor.
- PAU: The Pau are distributors that are used in buildings that comply with the ICT regulations, are placed in the entrance box of the house, where the two downpipe cables are connected, and have several direct outputs to user sockets.
The discount applied to the PVP is -30%
