Float switch (buoy) for dirty / waste water with IP-68 cable

This IP-68 buoy-type float switch is ideal for controlling the level of a tank, a reservoir or a wastewater or industrial wastewater pond. The switch comes with a 5 meter cable and a counterweight already built into the float body.

The device switches at an angle of about 45 degrees, using a mechanical switch. The maximum switching voltage rating is 250 V AC, but it can be used with a lower voltage (ie 110 V, 220 V, 240 V, etc.). The switch has a changeover contact, so it can be used for normally closed (NC) or normally open (NO) operation.

It has three conductive wires: common, NC and NO. By connecting the circuit to the common wire and one of the other two wires, you can choose between normally closed (NC) or normally open (NO) operation. In other words, you can decide whether the switch should make contact when the float is in the raised or hung situation.

Normally, a normally open (NO) float switch turns "on" when the float is below a preset level (gravity forces it down) and "off" when it rises to the preset level. A normally closed (NC) float switch works in reverse. It closes when on hang and turns on when above the preset level. Normally closed (NC) or normally open (NO) operation depends on the wiring. It can be used to switch a pump or an alarm and has an IP68 waterproof rating.

Please read the manual carefully before connecting the float switch.

Specifications:

• It can be used for normally closed or normally open operation.
• Includes a 5 meter cable.
• The mechanical switch is designed for voltages up to 250 V AC.
• Robust waterproof PP casing (IP68 certified).
• With a liquid-tight double chamber and a counterweight integrated into the body of the float switch.
• Maximum depth level: 20 m.
• Maximum intensity: 10(8) A / 250V.
• For water: dirty or residual.
• Counterweight: Yes (incorporated in the float)

 

The discount applied to the PVP is -60%

Basket discount